Swamp Donkey

Ok so my '93 XJ came with a factory spare tire holder, ive got the bumper with the mount, the plate that goes on the hatch and the piece the tire mounts to that swings out... Had to gather this stuff up from the previous owner, but... keep thinking something missing... So for all who has this on their XJ, post up a pic, one without a tire on it and also prety close if possible... Thanks

winston427

Is it this still?

Swamp Donkey

Its not that one, it all connects just to the bumper...

winston427

Contact BuckB91XJ, he has the other style like yours. He may have a pic with the tire off of it.

NickM

There is a plate that mounts to the unibody behind the bumper and to the bottom of the bumper on the inside-the hinge mounts on the outside and these two pieces sandwich the bumper skin between them.
There is also a u shaped piece that mounts on the other side of the unibody from the aforementioned bracket and to the top edge of the bumper.
Your bumper skin should have all these holes on it already.

Nick

Swamp Donkey

Ok so im prety sure its all there now, but... what connects the swing out/tire holder to the plate on the bumper? I drawed some arrows on where im talking about.. the bracket on the bumper has threaded bolt holes top and bottom but the tire holder has some prety good sized holes, alot bigger then it looks to be 9/16" threaded bolt holes in the bracket thats on the bumper... ???

Swamp Donkey

BUMPY....

Cheap$200Jeep

PM me with your email address and I can send you the factory drawing with the parts break down. If you want to sell it, I will give you $50 for just the swing out portion...

Cheap$200Jeep

the drawing/list is on the way...

Swamp Donkey

Thanks! I see now all thats missing are them two bolts, im sure ive got quite a few of em in my drawer full of extra bolts, figured there was more then that to it but there isnt.