Senior Member
Quote:
check page 1 a1. I'm doing the same on mine but with spray once I hammer the ***load of dents out.Originally Posted by a1racer
does anybody think something like this but up to the body line all they way around would look ok i am just trying to figure how i want to do it when i get ready or just do the whole thing and be done with it. sorry i was just using your jeep for an example
CF Veteran
Quote:
CorrectOriginally Posted by 95Cherokee
XJ?2010, why did your bed liner chip, you didn't sand all the way to the very edge of the masking tape before spraying?
CF Veteran
Not too much just scuff up the area then use some form of prep wipe (I used duplicolor dirt/wax remover) then tape and spray away
Senior Member
The more time you spend prepping the longer it would last. Spend 80% time prep 20% time actually laying the product down.
CF Veteran
Quote:
ExactlyOriginally Posted by Ritter4.0
The more time you spend prepping the longer it would last. Spend 80% time prep 20% time actually laying the product down.