If i do a home brew snorkel i keep seeing everybody using 3 inch pipe couldent i use 2 and it do the samething

 

I was wondering the same thing someone told me any smaller would congest the airflow but i think 3in is to big to look good

 

Look at my album, mine is made out of 3' abs and it looks just like the same size ones you buy.

 

I did 3" on by 93 briarwood. I took it out the front of my finder with a turn joint on both sides and ran it up the driver side window post. I like the look but I do think that it is a little overkill on size. I did loose a little low end after the snorkel

 

I have been planning on using 2" for when i make mine i think 2" should be able to flow more air than the filter can let in but i could always be wrong.

 

If you go to make it send me some pics of what you did and let me know how it works i have about 4 feet of 2" is why i was wondering why buy more when i have on hand

 

i did mine in 3"....once i went into the fender i reduced it to 2"....and do yourself a favor and get sch 40...stronger than the black abs and its not as britttle when its cold out

 

If you could post up some pix to me 3" still semes big im intristed in seeing how you did the install

 

[QUOTE=Jeepguy20052007;861906]I did 3" on by 93 briarwood. I took it out the front of my finder with a turn joint on both sides and ran it up the driver side window post. I like the look but I do think that it is a little overkill on size. I did loose a little low end after the snorkel[/QUOTEY


You lost low end power after installing the snorkel?