Could anyone please do your best to explain to a newbie, how to remove my cancerous rockers and weld on tubing, also specifically what to weld onto...Thanks!

 

One member on here just did that , just have to find it.

 

Cut the cancer out find 2x5 rect tubing cap the ends and weld it in I think the rockers are about 60" when you weld it in weld it to the body but be careful because it's a thick to thin weld. Only weld three inches at a time because of warpage, skip around and weld in random stops

 

i am in the process of it right now. i am doing it a different way. i am putting the steel at a sort of an angle to get a stronger hold, and it follows the body contour a little better. if you would like me to take build pictures, i will do that. just let me know

 

yes please gmsween

 

alright... well im in college. i will be working on these when i go home for the weekend. i have one side completely done, and will be finishing the other side this weekend. i will make sure to take pictures and post them for you.

 

Pics would be awesome, Thx!

 

Here is my rocker slider. Its made from 3"x6"x3/16" tube.

 

Looks easy enough, did you weld it to the undercarriage with supports or anything? Can it be done without removing the doors?

 

I will be tying it to the frame after I add frame stiffeners. It might beable to be done with the doors on just be a little harder. I was working on my doors so I just took them off.

 

I had that same problem on my jeep and replaced them a few years ago, did a write up on another site.. here you go, hope it helps!!

I think this is a great thing to do for more reasons than one

http://offroadjeepers.com/showthread.php?t=1115

 

Very nice build, appreciate all the help. Has anyone out there done this on a two door?

 

Yeah, a buddy of mine did it, he did pretty much the same thing I did but he put more bolts through the angle iron in the front door area. It makes up for not being able to access it through the rear door in the 4dr model. I will see if he has got any pictures.

good luck!