Install Guide - H. D. Offroad Engineering Frame Stiffeners (Rear) 56k beware
Thread Starter
Senior Member
Joined: Apr 2010
Posts: 720
Likes: 1
From: Marshall, WI
Year: 1994
Model: Cherokee
Engine: 4.0L i6
Originally Posted by bmikes
This thread just finalized my dicision on wether or not to get frame stiffeners! That's a solid write up on your process man! Props! 
so my question is where can you get weld through primer at?
so my question is where can you get weld through primer at?Last edited by kissthis66; Feb 18, 2013 at 07:21 AM.
Senior Member
Joined: Mar 2012
Posts: 517
Likes: 0
From: gresham
Year: 1993
Model: Cherokee
Engine: inline 6 4.0 ho
Thank you, I haven't gotten the front installed as I got called away from home for a job assignment. But have to say with just the rear and middle sections installed it feels way more solid than it used to. Overall I am extremely happy with the results and look forward to gettin the front stiffeners on. As far as the weld through primer, I was able to pick some up from my local farmer parts store here in town. I would check autozone/pepboys possibly Walmart or a home depot.
::CF Administrator::
Joined: Feb 2011
Posts: 14,479
Likes: 805
From: Blunt, South Dakota
Year: 97
Model: Cherokee (XJ)
Engine: 4.6 stroker
https://www.cherokeeforum.com/f46/ro...2/#post3219889
Link to my build thread. Shows full install front to back, along with shaving off the lower control arm mounts....I installed a 3 link so they needed to go lol
Start at the beginning, long thread but worth it IMO HAHA
Link to my build thread. Shows full install front to back, along with shaving off the lower control arm mounts....I installed a 3 link so they needed to go lol
Start at the beginning, long thread but worth it IMO HAHA
Thread
Thread Starter
Forum
Replies
Last Post
HeepJeeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
Oct 12, 2010 07:09 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)