Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here! ZJ (93-98), WJ (99-04), WK (05+)
All ZJ/WJ/WK specific tech questions asked here!

dash light issues

Thread Tools
 
Search this Thread
 
Old Nov 4, 2017 | 01:42 AM
  #1  
alcompute's Avatar
Thread Starter
Newbie
 
Joined: Nov 2017
Posts: 3
Likes: 0
Year: 1997
Model: Cherokee(SJ)
Engine: 4.0
Default dash light issues

1997 grand Cherokee Laredo
my dash lights when lights are on flash go dim then off then low then back on really annoying especially at night i am trying to find the ground for the isterment cluster someone said a bad ground so got the cluster out and i have one plug was going to take the ground and run a new wire but dont want to hit wrong wire so 2 questions wiring diagram for dash cluster and with the dash lights recommend replace headlight switch?
Reply
Old Nov 4, 2017 | 01:49 AM
  #2  
SirCyber's Avatar
Seasoned Member
 
Joined: Oct 2017
Posts: 473
Likes: 17
From: Western Washington
Year: 1990
Model: Cherokee
Engine: 4.0L Renix
Default

There is a common ground that goes to the firewall... I would check that first, make sure it's getting good contact. Might not have to run new wires, just clean and put back. Check out cruiser54.com for more info. It's not renix specific, lots there can help
Reply
Old Nov 5, 2017 | 09:26 PM
  #3  
dave1123's Avatar
Old fart with a wrench
 
Joined: Nov 2010
Posts: 14,398
Likes: 740
From: Manlius, east of Syracuse, NY
Year: 2000 XJ Sport & WJ Laredo
Model: Grand Cherokee (WJ)
Engine: 4.0L
Default

It's probably just the dimmer slide switch. My 97 did the same thing. I just soldered a resistor bypass on it.
Reply
Old Nov 5, 2017 | 09:49 PM
  #4  
alcompute's Avatar
Thread Starter
Newbie
 
Joined: Nov 2017
Posts: 3
Likes: 0
Year: 1997
Model: Cherokee(SJ)
Engine: 4.0
Default

Thanks I have managed to track down the problem the ground at the connector on the back of the headlight switch and dimmer and fog light switch cluster the ground wire isnt making a good connection on the pins I can make the dimming and flicker happen by pulling on the black ground at the switch so not sure how im going to fix going to town to see if i can get a replacement switch or even a new 16 pin connector.
Thanks though.
Reply
Old Nov 6, 2017 | 07:37 AM
  #5  
Cherryokee's Avatar
CF Veteran
15 Year Member
Liked
 
Joined: May 2010
Posts: 1,175
Likes: 31
From: Boston
Year: 2000
Engine: 4.7L
Default

This from my '99, needed new switch and connector...


Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Joshua White
Jeep Builds
52
Nov 6, 2018 09:35 AM
BC.Bryan92xj
Jeep Builds
97
May 2, 2018 04:58 AM
bdferber
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Mar 22, 2008 03:17 AM
droff85
Introductions
2
Dec 1, 2007 03:24 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 08:33 PM.