Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here! ZJ (93-98), WJ (99-04), WK (05+)
All ZJ/WJ/WK specific tech questions asked here!

A/C Not Coming out of Vents or defrost. Only Floor. Need Help!

Thread Tools
 
Search this Thread
 
Old May 20, 2012 | 01:36 PM
  #61  
freegdr's Avatar
CF Veteran
 
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Default

Originally Posted by rookcherokee
I know, I just can't seem to find where this is actually located:


Behind my control unit is just that wiring harness seen in the picture I took. Everywhere I read says the vacuum lines should be behind there as well
you are aware these are vacuum lines not electric
Reply
Old May 20, 2012 | 01:37 PM
  #62  
rookcherokee's Avatar
Thread Starter
Seasoned Member
 
Joined: Feb 2009
Posts: 292
Likes: 0
From: Wenatchee,WA
Year: 1995
Model: Grand Cherokee
Engine: 5.2L V8
Default

Originally Posted by freegdr
you are aware these are vacuum lines not electric
Yeah, was just saying that those vacuum lines weren't behind my a/c control unit like in the picture.
Reply
Old May 20, 2012 | 01:39 PM
  #63  
freegdr's Avatar
CF Veteran
 
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Default

Originally Posted by rookcherokee
Yeah, was just saying that those vacuum lines weren't behind my a/c control unit like in the picture.
gotta be there somewhere
Reply
Old May 20, 2012 | 01:43 PM
  #64  
rookcherokee's Avatar
Thread Starter
Seasoned Member
 
Joined: Feb 2009
Posts: 292
Likes: 0
From: Wenatchee,WA
Year: 1995
Model: Grand Cherokee
Engine: 5.2L V8
Default

Originally Posted by freegdr
gotta be there somewhere
Well, it turns out the Automatic Temperature Control system is electrically controlled, not vacuum controlled. So these aren't on mine at all, it's only wires..

.. Yeah, news to me too
Reply
Old May 20, 2012 | 01:43 PM
  #65  
freegdr's Avatar
CF Veteran
 
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Default

do you have this link....http://www.jeep4x4center.com/knowledge-base/index.htm
Reply
Old May 20, 2012 | 05:07 PM
  #66  
rookcherokee's Avatar
Thread Starter
Seasoned Member
 
Joined: Feb 2009
Posts: 292
Likes: 0
From: Wenatchee,WA
Year: 1995
Model: Grand Cherokee
Engine: 5.2L V8
Default

Originally Posted by ol"blue
I went to a couple of places today to check into this. The Automatic Temperature Control system is electrically controlled, not vacuum controlled. So I looked at the pic of your ac control, and it has two large ***** with the dial temp setting, not three large *****. So you have the ATC system.
This is from my '97 ZJ FSM. It may be different in your '95 manual. The system can run a self diagnostic.
Tried the self diagnostic and no fault codes came up - it showed 00. I read that the codes are erased when the battery is disconnected/connected, but wouldn't it throw a code once I used the a/c controls again?

Where should I go from here?
Reply
Old May 20, 2012 | 06:01 PM
  #67  
ol"blue's Avatar
CF Veteran
 
Joined: Mar 2009
Posts: 28,068
Likes: 6
From: Tenn. and Mich.
Year: 2004
Model: Grand Cherokee
Engine: 4.7L V8
Default

Originally Posted by stev-o
my ac is only coming out of the defrost up by the windshield and not out of the vents why is that it use to work just fine
Sounds like you have a vacuum leak. Check all the vacuum lines, the cruise control solenoid if equipped, and the vacuum cannister.
Reply
Old May 20, 2012 | 06:07 PM
  #68  
ol"blue's Avatar
CF Veteran
 
Joined: Mar 2009
Posts: 28,068
Likes: 6
From: Tenn. and Mich.
Year: 2004
Model: Grand Cherokee
Engine: 4.7L V8
Default

If you didn't get a code showing the control head/assy. was bad, I'd say the cause of your issues in your 1st post would be the blend doors. That's a fairly common issue with the Grand Cherokees. >http://www.heatertreater.net/indextech.html#window
Reply
Old May 20, 2012 | 06:20 PM
  #69  
rookcherokee's Avatar
Thread Starter
Seasoned Member
 
Joined: Feb 2009
Posts: 292
Likes: 0
From: Wenatchee,WA
Year: 1995
Model: Grand Cherokee
Engine: 5.2L V8
Default

Originally Posted by ol"blue
If you didn't get a code showing the control head/assy. was bad, I'd say the cause of your issues in your 1st post would be the blend doors. That's a fairly common issue with the Grand Cherokees. >http://www.heatertreater.net/indextech.html#window
So the 98-04 blend doors on that site will fit on mine okay? I don't see any for the 97 and earlier.
Reply
Old May 20, 2012 | 06:38 PM
  #70  
ol"blue's Avatar
CF Veteran
 
Joined: Mar 2009
Posts: 28,068
Likes: 6
From: Tenn. and Mich.
Year: 2004
Model: Grand Cherokee
Engine: 4.7L V8
Default

I can't answer that. You'd need to check with them.
Reply
Old May 20, 2012 | 08:50 PM
  #71  
wifin's Avatar
Seasoned Member
 
Joined: Nov 2011
Posts: 448
Likes: 0
From: Falls Church, VA
Year: 2000
Model: Cherokee
Engine: 4.0 I6
Default

Just checking in to see how you're problem is turning out. Hope it's getting better haha
Reply
Old May 21, 2012 | 10:15 PM
  #72  
rookcherokee's Avatar
Thread Starter
Seasoned Member
 
Joined: Feb 2009
Posts: 292
Likes: 0
From: Wenatchee,WA
Year: 1995
Model: Grand Cherokee
Engine: 5.2L V8
Default

Does anyone have a link to or write-up for changing the '95 blend doors without removing the dash? (A hack method) I've seen them for the '98+: http://www.nc4x4.com/forum/index.php...re-dash.79583/ but not for the '95. I don't want to cut into the wrong part of the box.

Moreover, is this even possible in the '95? Or will I have to remove the dash and box?

Last edited by rookcherokee; May 21, 2012 at 10:20 PM.
Reply
Old May 22, 2012 | 08:17 AM
  #73  
ol"blue's Avatar
CF Veteran
 
Joined: Mar 2009
Posts: 28,068
Likes: 6
From: Tenn. and Mich.
Year: 2004
Model: Grand Cherokee
Engine: 4.7L V8
Default

I checked w/the dealer about this. They offer the blend door for your '95 ZJ w/ the ATC system, part # 501292AA (or 5012922AA sorry). Price $49.10.
They said it didn't look like you could repair it like the later models, thought you'd have to remove the unit to repair. I can't find any other info either way.
I would have thought they would be similar though, and you could.
Reply
Old May 22, 2012 | 02:22 PM
  #74  
rookcherokee's Avatar
Thread Starter
Seasoned Member
 
Joined: Feb 2009
Posts: 292
Likes: 0
From: Wenatchee,WA
Year: 1995
Model: Grand Cherokee
Engine: 5.2L V8
Default

Originally Posted by ol"blue
I checked w/the dealer about this. They offer the blend door for your '95 ZJ w/ the ATC system, part # 501292AA (or 5012922AA sorry). Price $49.10.
They said it didn't look like you could repair it like the later models, thought you'd have to remove the unit to repair. I can't find any other info either way.
I would have thought they would be similar though, and you could.
Thanks for all the info, Blue. I appreciate it!

Was hoping to hear I didn't have to take the dash apart and pull the box. The dash isn't too bad, just not looking forward to removing the box.. seems like a bit of a pain, with the heater & a/c hoses.

We'll see how it goes.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
t.mcginley.jr
Jeep Builds
105
Jan 31, 2024 04:58 PM
xjwolfman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Aug 26, 2020 12:59 PM
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
39
Nov 7, 2015 01:22 AM
BrownXJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Sep 4, 2015 04:20 PM
studmuffin
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Sep 3, 2015 06:59 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 05:42 PM.