I have 2001 grand cherokee limited. 4.7 v8 quadtrac. I need to change inner bearings and I need to know what axle I have on front end. Is it dana 30 or 35

 

All Grand Cherokee models 1999-2004 feature a Dana 30 front axle. just a fyi for your fluid when you are done, the Trac-lok and Vari-lok equipped axles require 2.5 ounces of Limited Slip Additive be added to the lubricant.

 

Thank u sir. I do have other questions but ill post tomorrow. Thanks again

 

What makes you think you need to change the inner bearings, and have you ever done bearings in a differential?

 

Was getting grinding noise from front axle. Took to dealer to find out what it was. They inspected it. Ring and pinion good. Told me need a bearing kit. I don't know much about changing these bearing. Having a friend help that has done it

 

Also wondering since I got it apart. Do I need to or should I replace other bearings, crush sleeve etc.? Advance auto has reg bearing kit and master bearing kit.

 

You shouldn't have to mess with the pinion gear unless the pinion bearings are shot too.

 

Ok thanks

 

Ok got axles out and both bearings and races were shot. Took less than hr. Easier than thought. Can anyone tell me what the torque specs are on the 4 bolts?

 

alldata says 45ftlbs for the front diff bearing cap bolts. A online repair manual says 35-50ftlbs.
PDF, Down load of manual if you want it or others who search this.
http://www.fyurl.com/rr.php?c=2&site...xle_manual.pdf

 

There is no crush sleeve on a dana 30 just shims REPLACE ALL BEARINGS!! metal debris from your other bad bearings has been run in your differential and will cause premature failure of other said bearings.