97 to 95 tc swap
06-19-2009, 10:18 PM
#1
Newbie
Thread Starter
Join Date: Jun 2009
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
97 to 95 tc swap
I would like to know if a 242 transfer case from a 97 gc will fit in a 95 gc without an input shaft swap? My vc is going out and this is a cheaper route to go. Thanks for any help.
06-19-2009, 10:57 PM
#2
Senior Member
Join Date: Sep 2008
Location: pa
Posts: 772
Likes: 0
Received 5 Likes
on
3 Posts
Year: 2000
Model: Grand Cherokee
Engine: 4.0
V8? you will likely have to change the input shaft because the transmissions are different from 95-97. You also need the rear driveshaft,linkages,bezel,wiring. And rewire your VIC so it knows what range it's in.
Thread
Thread Starter
Forum
Replies
Last Post
TNXJsleeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
10-02-2015 08:04 PM
sjm79902
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-30-2015 11:14 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)