i really like how you did the doors i might have to do that some time so it dont get to hot in side next summer. is it easy to get the doors on and off how you did it?

 

It is very easy to take them on and off. It's a matter of just picking it up, or sliding it down. I'm not running electrical so I don't have to worry about any wires. Makes it alot easier for me. My buddy did it this way too, and he loves it just as much as I do. Just make sure to follow the steps I listed. We did trial and error, so we could find the easiest way.

 

Got all my wires pulled and up to the front, so they won't be in the way while cutting. I also started making my back doors like the front where they will just lift off, and set on. Chopping will start in an hr or so.

 

Why are all the lights and everything out? What did I miss? haha are you painting it?

 

so subbed on this one ha. diggin it man.

 

I'm chopping it, and caging the whole thing haha

 

So here are a few shots of what went on tonight. Will get better pics tomorrow in the day light.

 

Good work man.

 

cant wait to see the finished product.
keep it up.

 

Thank you. Yeah It's gonna be a week or two til I drive it cause I gotta get the rear cage built and everything so it has some rigidity. Right now I would tweak the unibody if I went crawling.

 

Here are some pics you can see better of the cut.

 

Cut over to the frame rail on part of the floor.

 

Sorry they are hard to see I will get better tomorrow, but I cut around the gas tank filler, trimmed some other small spots, drained my gas tank, narrowed the back end.

 

So subbing! But, you said you did doorless on the red one which is 97+. Send me the link to the write-up ypu usd?

 

That one I never found a write up for so I kinda made my own, and just winged it. Basically you grind off the pin head, beat the pins out, find a bolt that goes into the hole, a nut for the other side. Wires you can leave disconnected or make a quick connect plug. Got a brief write up in my old build thread.

https://www.cherokeeforum.com/f46/99...-87115/index5/