Grimace; The purple haze.
CF Veteran
Joined: Nov 2011
Posts: 1,221
Likes: 3
From: Westminster, MD
Year: 1998
Model: Cherokee
Engine: 4.0
JKS front bar pin eliminators arrived along with Rough Country's rear shock flag nuts. I'm not even gonna attempt to get the rear upper bolts out. Probably easier and quicker just to punch out the weld nuts.
I think I need some adjustable upper control arms, rear bump stops, and few misc small stuff before the lift kit is ready for installation.
I think I need some adjustable upper control arms, rear bump stops, and few misc small stuff before the lift kit is ready for installation.
Thread Starter
CF Veteran
Joined: Jan 2013
Posts: 19,219
Likes: 45
From: west chester, pa
Year: 1999
Engine: 4.0
Thread Starter
CF Veteran
Joined: Jan 2013
Posts: 19,219
Likes: 45
From: west chester, pa
Year: 1999
Engine: 4.0
So today I got a pile of parts from a guy parting out a jeep.
$80 total
Ax15 crossmember. (I read that it ll give 3/4" drop without sacrificing belly clearance). I have aw4 crossmember laying around. I can do comparisons.
4 adjustable control arms. (Uppers and lowers)
99+ intake manifold and throttle body. (Gonna sell it to a buddy and probably gonna bore out the throttle body too.)
Np231. (It ll be a donor case for my HD build... 6 gear planetary, wide chain conversion, along with teraflex 2low kit and a sye.)
Sway bar with quick disconnects on it.
Solid covers for a Dana 30 and Chrysler 8.25. (Not sure if it's gonna be left alone or painted purple)
New-ish hub bearings with axle shafts still attached to it.
$80 total
Ax15 crossmember. (I read that it ll give 3/4" drop without sacrificing belly clearance). I have aw4 crossmember laying around. I can do comparisons.
4 adjustable control arms. (Uppers and lowers)
99+ intake manifold and throttle body. (Gonna sell it to a buddy and probably gonna bore out the throttle body too.)
Np231. (It ll be a donor case for my HD build... 6 gear planetary, wide chain conversion, along with teraflex 2low kit and a sye.)
Sway bar with quick disconnects on it.
Solid covers for a Dana 30 and Chrysler 8.25. (Not sure if it's gonna be left alone or painted purple)
New-ish hub bearings with axle shafts still attached to it.
CF Veteran
Joined: Oct 2013
Posts: 5,924
Likes: 203
From: Greenville, SC
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
So today I got a pile of parts from a guy parting out a jeep. $80 total Ax15 crossmember. (I read that it ll give 3/4" drop without sacrificing belly clearance). I have aw4 crossmember laying around. I can do comparisons. 4 adjustable control arms. (Uppers and lowers) 99+ intake manifold and throttle body. (Gonna sell it to a buddy and probably gonna bore out the throttle body too.) Np231. (It ll be a donor case for my HD build... 6 gear planetary, wide chain conversion, along with teraflex 2low kit and a sye.) Sway bar with quick disconnects on it. Solid covers for a Dana 30 and Chrysler 8.25. (Not sure if it's gonna be left alone or painted purple) New-ish hub bearings with axle shafts still attached to it.
CF Veteran
Joined: Oct 2013
Posts: 5,924
Likes: 203
From: Greenville, SC
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
Thread Starter
CF Veteran
Joined: Jan 2013
Posts: 19,219
Likes: 45
From: west chester, pa
Year: 1999
Engine: 4.0
CF Veteran
Joined: Oct 2012
Posts: 1,127
Likes: 0
From: Capac, Mi
Year: 1997
Model: Cherokee
Engine: 4.0L
i'll give you the $80 for the both, you break even and i get the diff covers i want
Thread Starter
CF Veteran
Joined: Jan 2013
Posts: 19,219
Likes: 45
From: west chester, pa
Year: 1999
Engine: 4.0
haha nah they are staying with the axles when I sell them... I plan to convert the rear 8.25 to disc brakes and relocate the shock mounts, then reinforce the d30 first. U can be the first on the waiting list. Haha
CF Veteran
Joined: Oct 2012
Posts: 1,127
Likes: 0
From: Capac, Mi
Year: 1997
Model: Cherokee
Engine: 4.0L
damn it i just need the covers, lol. I planned on buying new ones. i am actually going to email SOLID and see if they sell them not powdercoated. As i am going to be blasting and powdercoating them black with Lime green lettering and spines.
Thread Starter
CF Veteran
Joined: Jan 2013
Posts: 19,219
Likes: 45
From: west chester, pa
Year: 1999
Engine: 4.0
buy the axles, keep the covers then sell the rest. Lol
CF Veteran
Joined: Feb 2013
Posts: 1,286
Likes: 2
From: Belton S.C.
Year: 1998
Model: Cherokee
Engine: 4.0
So today I got a pile of parts from a guy parting out a jeep.
$80 total
Attachment 285746
Ax15 crossmember. (I read that it ll give 3/4" drop without sacrificing belly clearance). I have aw4 crossmember laying around. I can do comparisons.
4 adjustable control arms. (Uppers and lowers)
99+ intake manifold and throttle body. (Gonna sell it to a buddy and probably gonna bore out the throttle body too.)
Np231. (It ll be a donor case for my HD build... 6 gear planetary, wide chain conversion, along with teraflex 2low kit and a sye.)
Sway bar with quick disconnects on it.
Solid covers for a Dana 30 and Chrysler 8.25. (Not sure if it's gonna be left alone or painted purple)
New-ish hub bearings with axle shafts still attached to it.
$80 total
Attachment 285746
Ax15 crossmember. (I read that it ll give 3/4" drop without sacrificing belly clearance). I have aw4 crossmember laying around. I can do comparisons.
4 adjustable control arms. (Uppers and lowers)
99+ intake manifold and throttle body. (Gonna sell it to a buddy and probably gonna bore out the throttle body too.)
Np231. (It ll be a donor case for my HD build... 6 gear planetary, wide chain conversion, along with teraflex 2low kit and a sye.)
Sway bar with quick disconnects on it.
Solid covers for a Dana 30 and Chrysler 8.25. (Not sure if it's gonna be left alone or painted purple)
New-ish hub bearings with axle shafts still attached to it.
Lucky bastard!
I would have happily paid $100 just for the covers. I'll give you $60 for the 8.25 one.
Thread Starter
CF Veteran
Joined: Jan 2013
Posts: 19,219
Likes: 45
From: west chester, pa
Year: 1999
Engine: 4.0
CF Veteran
Joined: Feb 2013
Posts: 1,286
Likes: 2
From: Belton S.C.
Year: 1998
Model: Cherokee
Engine: 4.0