PA cherokee club
10-26-2016, 03:46 PM
CF Veteran
Join Date: Dec 2009
Location: Newport, pa
Posts: 2,820
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
So since May my 2001 has lost about a 1/4" of coolant in my reservoir bottle. I really don't drive it that much, maybe twice or three times a week around town and I monitor my coolant level every week. I have put about roughly 500 miles on it since May. I would assume if I drove it as a DD the coolant loss would be more significant.
We have finally settled into our new house and I got all my tools unpacked. I decided to work on rebuilding my differentials this Saturday. While I was doing the front Dana 30, I checked the bottom of water pump to check for leaks. I noticed dried coolant around the general area and the pumps bottom feels and looks wet. From my research everyone recommends going OEM with the water pump. I will also replace the t-stat and lower and upper radiator hoses while I'm in there. All OEM parts. The PO replaced the radiator last November and it looks in good condition.
Can you guys look over this list and help make certain I am ordering the right materials?
OEM Water Pump
PN- 4626215AF
Apparently this is discontiued PN and replaced by the following:
http://www.wermopar.com/jeep/cheroke...ame=water-pump
OEM Upper Radiator Hose
PN-52006301
OEM Lower Radiator Hose
PN-52028286AE
OEM Thermostat 195F
PN- 52028186AC
Thanks for your help, any suggestions would be appreciated.
We have finally settled into our new house and I got all my tools unpacked. I decided to work on rebuilding my differentials this Saturday. While I was doing the front Dana 30, I checked the bottom of water pump to check for leaks. I noticed dried coolant around the general area and the pumps bottom feels and looks wet. From my research everyone recommends going OEM with the water pump. I will also replace the t-stat and lower and upper radiator hoses while I'm in there. All OEM parts. The PO replaced the radiator last November and it looks in good condition.
Can you guys look over this list and help make certain I am ordering the right materials?
OEM Water Pump
PN- 4626215AF
Apparently this is discontiued PN and replaced by the following:
http://www.wermopar.com/jeep/cheroke...ame=water-pump
OEM Upper Radiator Hose
PN-52006301
OEM Lower Radiator Hose
PN-52028286AE
OEM Thermostat 195F
PN- 52028186AC
Thanks for your help, any suggestions would be appreciated.
10-27-2016, 07:26 AM
Junior Member
Join Date: Aug 2016
Location: Warren County NJ
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
I have a rattle coming from my belt system, gonna assume its the idler pulley and order a new one.
Also, you guys know of any lighted Lund moonvisors?
Also, you guys know of any lighted Lund moonvisors?
10-27-2016, 12:45 PM
CF Veteran
Join Date: Jun 2016
Location: York PA
Posts: 2,929
Likes: 0
Received 5 Likes
on
5 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 Litre I6
Thanks buddy, I am going to get the bypass tube as well, thanks for the suggestion. Hopefully get all this **** order soon. I'll let you know how I make out. I really need to start a build/maintenance thread.
10-27-2016, 12:46 PM
CF Veteran
Join Date: Jan 2013
Location: west chester, pa
Posts: 19,216
Likes: 0
Received 39 Likes
on
35 Posts
Year: 1999
Engine: 4.0
Originally Posted by CurrySoSpicy
Thanks buddy, I am going to get the bypass tube as well, thanks for the suggestion. Hopefully get all this **** order soon. I'll let you know how I make out. I really need to start a build/maintenance thread.
10-27-2016, 12:47 PM
CF Veteran
Join Date: Jan 2013
Location: west chester, pa
Posts: 19,216
Likes: 0
Received 39 Likes
on
35 Posts
Year: 1999
Engine: 4.0
Originally Posted by LSK
I have a rattle coming from my belt system, gonna assume its the idler pulley and order a new one.
Also, you guys know of any lighted Lund moonvisors?
Also, you guys know of any lighted Lund moonvisors?
10-28-2016, 11:42 AM
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
10-28-2016, 11:49 AM
CF Veteran
Join Date: Jun 2016
Location: York PA
Posts: 2,929
Likes: 0
Received 5 Likes
on
5 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 Litre I6
10-28-2016, 01:03 PM
Junior Member
Join Date: Aug 2016
Location: Warren County NJ
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
10-28-2016, 05:01 PM
CF Veteran
Join Date: Dec 2009
Location: Newport, pa
Posts: 2,820
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
10-30-2016, 03:05 AM
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
10-30-2016, 03:25 PM
CF Veteran
Join Date: Feb 2011
Location: lewisberry PA
Posts: 1,212
Likes: 0
Received 1 Like
on
1 Post
Year: 96
Model: Cherokee
Engine: 4.0
Originally Posted by NewKindOfClown
The MJ market fluctuates from $1-2k up to $6-7k. Be patient
10-31-2016, 08:03 AM
Junior Member
Join Date: Aug 2016
Location: Warren County NJ
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
So I checked my idler and it was loose, but my water pump was WAY worse.
flushed the coolant 6 times before I even got close to clear water out of it, then did the new pump with a felpro gasket. It was shaving aluminum off the housing, the shaft had about a 1/4 inch of play in it.
Now that's fixed, I have a p0100 code for my MAF i have to figure out tonight, hopefully before the hordes of trick or treaters show up.