PA cherokee club
Originally Posted by LSK
its not actually a lund visor, I think its got a dura shield sticker on it somewhere.
So I checked my idler and it was loose, but my water pump was WAY worse.
flushed the coolant 6 times before I even got close to clear water out of it, then did the new pump with a felpro gasket. It was shaving aluminum off the housing, the shaft had about a 1/4 inch of play in it.
Now that's fixed, I have a p0100 code for my MAF i have to figure out tonight, hopefully before the hordes of trick or treaters show up.
So I checked my idler and it was loose, but my water pump was WAY worse.
flushed the coolant 6 times before I even got close to clear water out of it, then did the new pump with a felpro gasket. It was shaving aluminum off the housing, the shaft had about a 1/4 inch of play in it.
Now that's fixed, I have a p0100 code for my MAF i have to figure out tonight, hopefully before the hordes of trick or treaters show up.
CF Veteran
Joined: Dec 2009
Posts: 2,820
Likes: 3
From: Newport, pa
Year: 1997
Model: Cherokee
Engine: 4.0
Originally Posted by LSK
oops sorry. the MAP sensor. I also cleaned the contacts on the TPS and the MAP, and blew the throttle body after taking it off.
Originally Posted by LSK
idk there was some dirt and soot in it, I took it off, and hit it with some compressed air and throttle body cleaner.
Seasoned Member
Joined: Jul 2015
Posts: 264
Likes: 1
From: York County, PA
Year: 1998
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: Jun 2016
Posts: 2,929
Likes: 5
From: York PA
Year: 2001
Model: Cherokee
Engine: 4.0 Litre I6
Nice man, he lives right near wild cat falls. He has a Cherokee too. It's a stock unregistered 2000. He has overheated it 4 times now. Drum brakes leak, needs new universal joints in the front end, needs a new radiator. It needs some TLC, poor thing. I'm sure the 0331 has cracked. I told him a bunch of times to be careful about that. LOL.



