ohio roll call
Seasoned Member
Joined: Jun 2009
Posts: 302
Likes: 0
From: Mid-Ohio Valley, Ohio
Year: 1997
Model: Cherokee
Engine: 4.0
Scored me another 8.25 rear end for $75 really hoping it has a locker. If it does may swap it out. If not I'll have one to build. It's the 27 spline so to make it the 29 all I should have to do is just switch the spider gears right?
I bought a '99 today. It has it's fair share of issues, but for $700 it's worth the risk and the chance and I may learn a thing or two.
The oil sending unit is failing. It works if you wiggle it around. I think the valve cover gasket is leaking a bit. The front sway bar bushing is gone. Cylinder #1 and #4 are not firing... seems to be an issue with the injectors (harness or PCM) according to the code it is throwing.
Where do you guys recommend getting parts?
The oil sending unit is failing. It works if you wiggle it around. I think the valve cover gasket is leaking a bit. The front sway bar bushing is gone. Cylinder #1 and #4 are not firing... seems to be an issue with the injectors (harness or PCM) according to the code it is throwing.
Where do you guys recommend getting parts?
CF Veteran
Joined: Apr 2012
Posts: 1,659
Likes: 0
From: Dayton OH
Year: 1995
Model: Cherokee
Engine: 4.0
No, the carriers are different, you will actually have to get a whole new carrier, shafts and everything, then you would have to have the gears set. So you are honestly better off just finding a whole 29 spline
Seasoned Member
Joined: Jun 2009
Posts: 302
Likes: 0
From: Mid-Ohio Valley, Ohio
Year: 1997
Model: Cherokee
Engine: 4.0
awesome thanks for the info. so it would be better to just swap the entire assembly, which is what i figured. but if it doesn't have a l.s.d. then who makes one for the 8.25? i can't seem to find one anywhere.
Senior Member
Joined: Aug 2012
Posts: 707
Likes: 0
From: 614 Ohio
Year: 98
Model: Cherokee
Engine: 4.0L
I bought a '99 today. It has it's fair share of issues, but for $700 it's worth the risk and the chance and I may learn a thing or two. The oil sending unit is failing. It works if you wiggle it around. I think the valve cover gasket is leaking a bit. The front sway bar bushing is gone. Cylinder #1 and #4 are not firing... seems to be an issue with the injectors (harness or PCM) according to the code it is throwing. Where do you guys recommend getting parts?
Seasoned Member
Joined: Mar 2012
Posts: 277
Likes: 0
From: northeast ohio
Year: 96 & 01
Model: Cherokee
Engine: 4.0
This is the military grade hummer that the police use to enforce the law on the trails in wellsville.I've only seen it at night so i can't ever get a good pic of it.Found some good day pics on the interwebz.




LSD's are made for both. Eaton makes a good lsd. Or you could go with an auto locker
I run a welded rear end and its my daily. Just wears the tires more. And probably will suck come winter. LOL
Seasoned Member
Joined: Mar 2012
Posts: 277
Likes: 0
From: northeast ohio
Year: 96 & 01
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: Sep 2012
Posts: 1,169
Likes: 5
From: grove city OHIO
Year: 1999
Model: Cherokee
Engine: 4.0 HO
That's awesome! I bet they have to pull straws or something to choose who gets that patroll because that would be a blast.
I'm having the jeep towed to my place this evening. I already have a full cart of parts on RockAuto.com. It's a '99 Limited I picked up for $700.
I am on the lookout for a PCM, as I think that is my issue with cylinders #1 and #4 not firing.
I am on the lookout for a PCM, as I think that is my issue with cylinders #1 and #4 not firing.
Newbie
Joined: Sep 2013
Posts: 14
Likes: 0
From: South western Ohio
Year: 1998
Model: Cherokee
Engine: 4.0
Welcome to the show. I'm new to the Cherokee world myself. There is a lot of good info on this site.
Senior Member
Joined: Jun 2012
Posts: 634
Likes: 0
From: Cuyahoga Falls
Year: 1994
Model: Cherokee
Engine: 4.0l
When did they get that. Never seen it down there, have you? What town is running that hummer?


