Moving the track bar bracket above the axle like we were saying. That is the thing about crossover - it is tough to match the reduced angle with the drag link.
As it sits, putting a pitman with less drop would make the angles closer, but I do not know how much it is off.

 

Yeah when I seen it was in shock. This is not mine it's my cousin xj he ordered it I told him you need adjustable track bar and that is what he got lol i look into a cross bar

 

Dear powers that be,

Forcing an ad upon me before allowing me to view the page I want to get to, and having Skynet "posts" with ads in them in no way encourage me to look at the product or change my opinion on them in a positive way. This is partly due to me not wanting to look at ads on the forum, and also partly due to these ads having nothing to do with my interests. i.e. the new Lexus crossover.


The end.

EDIT: 4x4 related ads - totally logical and welcome.

 

A head on picture knuckle to knuckle might help, hard to judge angles without seeing everything. Yes, I'm guilty of jumping right on the paint idea, cant do it without a pic of the entire front end.

 

Ok this is the pic of the one with problems

 

This one is not the same one I put the cross over on

 

Angles are steep, but no real issue with eachother's angles or length...

But still flip that bar around. As long as it is tight, it should not necessarily be the issue, but still a good idea.

 

Pretty much what I came up with, Jason's just quicker on the draw, Lol!

 

Like I was saying, there are soooo many things that can contribute. Worn control arm bushings, ball joints, tie rod ends, tie rod bushings, drag link ends, play in the steering box, play in the box mounting, lack of reinforcement around the box, out of balance tires, play in the super long TB bracket....often times a small issue with several things adds up to DW, so fixing a single things does not necessarily make a night and day change.
Total crap shoot.

 

Ill try to flip it tomorrow and see what happens I have some lower control arms for him but the back bolts on the lca was rusted in

 

about ready to drop the $$ for a cage... where is the best place to buy 1 3/4 120wall DOM?

marmon keystone?
Ben Hanks Racing?
metal mart?
sss?
just some places I came across...

 

Sexton offroad...like I have said 20 times
Edit, as far as I know sss and metal mart only stock Hrew

 

And Toby your track bar is backwards.. Do you drink? I will bet you a beer

 

I'm going to flip it in the morning.

 

After looking at your pics again it looks kinda like your trackbar is for a way bigger lift then you have, what brand is it?