CF Veteran
Got it out right away, flex time!
Didnt have to cut the bolt, the puller just fit over everyrhing. Didnt make the "quick disconnects" fastenal didn't have any clevis pins in stock, so I ordered some and they should be in friday, just though some 7/16 bolts on for now.
Whens the next trip, this sunday?
Didnt have to cut the bolt, the puller just fit over everyrhing. Didnt make the "quick disconnects" fastenal didn't have any clevis pins in stock, so I ordered some and they should be in friday, just though some 7/16 bolts on for now.
Whens the next trip, this sunday?
CF Veteran
Quote:
Im going 4300k projectors, with green halos.
Then also proabably like the 36 or 42 Inch light bar on the roof
Oh god...Originally Posted by PurpleToxin505
Im gonna get these when taxes come, http://www.norcalmr2.com/pegasus/Im going 4300k projectors, with green halos.
Then also proabably like the 36 or 42 Inch light bar on the roof
Junior Member
Quote:
Didnt have to cut the bolt, the puller just fit over everyrhing. Didnt make the "quick disconnects" fastenal didn't have any clevis pins in stock, so I ordered some and they should be in friday, just though some 7/16 bolts on for now.
Whens the next trip, this sunday?
Pictures look great... But how do you calc a RTI on that? LOLOriginally Posted by PurpleToxin505
Got it out right away, flex time!Didnt have to cut the bolt, the puller just fit over everyrhing. Didnt make the "quick disconnects" fastenal didn't have any clevis pins in stock, so I ordered some and they should be in friday, just though some 7/16 bolts on for now.
Whens the next trip, this sunday?
I think a bunch of us are going to Gordy's hill this weekend. I will probably just do Sat for the day.
CF Veteran
Quote:
Pictures look great... But how do you calc a RTI on that? LOL
I think a bunch of us are going to Gordy's hill this weekend. I will probably just do Sat for the day.
Haha its an underpass that seperates two neighborhoods since I got the jeep it has gained alot of ruts, I think I could've gone a little more but my tire was touch my fender because I had to turn to stay on the rampOriginally Posted by bill87123
Pictures look great... But how do you calc a RTI on that? LOL
I think a bunch of us are going to Gordy's hill this weekend. I will probably just do Sat for the day.
Senior Member
Quote:
Is that the on Gabaldon road in Duranes? Goes under the interstate?Originally Posted by PurpleToxin505
Haha its an underpass that seperates two neighborhoods since I got the jeep it has gained alot of ruts, I think I could've gone a little more but my tire was touch my fender because I had to turn to stay on the ramp
CF Veteran
Quote:
Is that the on Gabaldon road in Duranes? Goes under the interstate?
Yup, thats my stomping ground. Theres some other empty lots in this neighborhood thats are fun to play in, but they did gate up all the ditchesOriginally Posted by Monster3663
Is that the on Gabaldon road in Duranes? Goes under the interstate?
Quote:
Is that the on Gabaldon road in Duranes? Goes under the interstate?
Damn you know your areas well where do you usually patrol at? I've prob seen you a couple dozen times and not even noticed.Originally Posted by Monster3663
Is that the on Gabaldon road in Duranes? Goes under the interstate?
Quote:
By boys house is right right down the road from you they live in the farm and another one right next to the school on indian school and duranes.Originally Posted by PurpleToxin505
Yup, thats my stomping ground. Theres some other empty lots in this neighborhood thats are fun to play in, but they did gate up all the ditches
Senior Member
Quote:
I'm in the Northeast.Originally Posted by hbracing13
Damn you know your areas well where do you usually patrol at? I've prob seen you a couple dozen times and not even noticed.
CF Veteran
Quote:
Haha I went to that school, I live more towards the front of the neighborhood, like a minute away from the school.Originally Posted by hbracing13
By boys house is right right down the road from you they live in the farm and another one right next to the school on indian school and duranes.
Now that I can disconnect the sway bar wheres the best place to zip tie it to when I take it wheeling?
Also does any one have a welder? My muffler is only clamped on so it rotates, I just want to throw a couple tacks on there so it'll stop
Senior Member
Quote:
Now that I can disconnect the sway bar wheres the best place to zip tie it to when I take it wheeling?
Also does any one have a welder? My muffler is only clamped on so it rotates, I just want to throw a couple tacks on there so it'll stop
As high as you can get them. I used those small 6 or 7 inch bungies on mine for a year before I put the keepers.Originally Posted by PurpleToxin505
Haha I went to that school, I live more towards the front of the neighborhood, like a minute away from the school.Now that I can disconnect the sway bar wheres the best place to zip tie it to when I take it wheeling?
Also does any one have a welder? My muffler is only clamped on so it rotates, I just want to throw a couple tacks on there so it'll stop
CF Veteran
Quote:
As high as you can get them. I used those small 6 or 7 inch bungies on mine for a year before I put the keepers.
Okay, I have some zip ties I can throw on there and cut when we're done.Originally Posted by Monster3663
As high as you can get them. I used those small 6 or 7 inch bungies on mine for a year before I put the keepers.
CF Veteran
The Jeep is lookin way more capable than a few months ago Mike 
I got my adjustable LCA in today and checked the alignment. Probably the easiest things I have done so far. The toe is close and the caster is a little high but, sense I don't have the front DS in yet I don't know if its to going to be to much to cause any vibes. Maybe I can get started on the hack n tap Friday.
I got my adjustable LCA in today and checked the alignment. Probably the easiest things I have done so far. The toe is close and the caster is a little high but, sense I don't have the front DS in yet I don't know if its to going to be to much to cause any vibes. Maybe I can get started on the hack n tap Friday.
