Arizona
I'm at Ray and 101. Running in circles with repairs on my jeep. haven't been able to do any upgrades. Still bone stock.
- Ball joints are bad - I can't get to them because the rotor is rusted to the hub
- Just found out the computer isn't turning on the electric fan - fan is currently hardwired to battery with toggle switch inside
- Suspension is bad - leafs are flat in rear
- possible transmission issue - vibration during acceleration from dead stop to 30mph
Where to begin:
- Ball joints are bad - I can't get to them because the rotor is rusted to the hub
- Just found out the computer isn't turning on the electric fan - fan is currently hardwired to battery with toggle switch inside
- Suspension is bad - leafs are flat in rear
- possible transmission issue - vibration during acceleration from dead stop to 30mph
Seasoned Member
Joined: Aug 2011
Posts: 319
Likes: 0
From: San Tan Valley
Year: 1999
Model: Cherokee
Engine: 4.0
Yo whats up everyone. We need to get this thred back to life!!!!
I looking to go out this saturday either day or night it doesnt really matter just got the jeep done so im itchen to have soime fun!!!
I looking to go out this saturday either day or night it doesnt really matter just got the jeep done so im itchen to have soime fun!!!
Junior Member
Joined: Oct 2013
Posts: 69
Likes: 0
From: Albuquerque, NM
Year: 1989
Model: Cherokee
Engine: 4.0
Hello all, I'll be moving to the Phoenix area in August and I'm trying to decide if I should bring my xj or sell it. Is the xj enthusiast scene big there? Are there many places to wheel within less than an hour drive? Are there many junkyards with a solid supply of Renix parts?
::CF Moderator::
Joined: Aug 2011
Posts: 43,971
Likes: 1,578
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Hello all, I'll be moving to the Phoenix area in August and I'm trying to decide if I should bring my xj or sell it. Is the xj enthusiast scene big there? Are there many places to wheel within less than an hour drive? Are there many junkyards with a solid supply of Renix parts?




