LAS VEGAS XJ GROUP-----> 1st ROLL CALL.
Senior Member
Joined: Sep 2010
Posts: 617
Likes: 0
From: Las Vegas
Year: 1996
Model: Cherokee
Engine: 4.0
I tried getting 4WP to price match as I would've bought them today but they could only go as low as 215$ per light. So ordering online will be happening soon.
Stock XJ lights suck royally, I can't even tell if the lights are on most times.
Stock XJ lights suck royally, I can't even tell if the lights are on most times.
Member
Joined: Mar 2015
Posts: 134
Likes: 0
From: Las Vegas, NV
Year: 2001
Model: Cherokee
Engine: 4.0L I6
If you're interested, I have some pictures on page 1 of my build thread from when I installed them.
Senior Member
Joined: Sep 2010
Posts: 617
Likes: 0
From: Las Vegas
Year: 1996
Model: Cherokee
Engine: 4.0
Member
Joined: Mar 2015
Posts: 134
Likes: 0
From: Las Vegas, NV
Year: 2001
Model: Cherokee
Engine: 4.0L I6
They rule. Extremely bright at night and they outshine every car around on the road. They cover a lot more area to the sides and much farther out. And for the price I paid, I'm pretty satisfied. There probably are better lights available, but I'm sure they also cost a lot more too.
Senior Member
Joined: Apr 2014
Posts: 840
Likes: 0
From: las vegas, nv
Year: 1991
Model: Cherokee
Engine: I6 H.O, 99 manifold, APN header, neon injectors, cowl intake, screamin demon ignition system
Well the app totally took a crap on my phone, so i havent been on in a while
but in the mean time i ordered some new, brighter, amber colored rock lights. Also, i listen to Ben and Steve and re did all my wiring so it has relays! What a pain in the butt, but so worth it! ill try to post a pic tomorow. Anybody up for some wheeling anytime soon?
but in the mean time i ordered some new, brighter, amber colored rock lights. Also, i listen to Ben and Steve and re did all my wiring so it has relays! What a pain in the butt, but so worth it! ill try to post a pic tomorow. Anybody up for some wheeling anytime soon?
Senior Member
Joined: Apr 2014
Posts: 840
Likes: 0
From: las vegas, nv
Year: 1991
Model: Cherokee
Engine: I6 H.O, 99 manifold, APN header, neon injectors, cowl intake, screamin demon ignition system
Have you done the PutCo harness upgrade? That made my low beams brighter than my high beams were before it!
Senior Member
Joined: Apr 2014
Posts: 840
Likes: 0
From: las vegas, nv
Year: 1991
Model: Cherokee
Engine: I6 H.O, 99 manifold, APN header, neon injectors, cowl intake, screamin demon ignition system
No
It still gets shaky at times. Ball joints, wheel bearing units arent even a year old. Track bar has same angle to tie rod as it had before and it didnt shake. literally one day i was driving and it got death wobble, but the track bar bracket came loose, so i retorqued bolts and aactually welded the bracket on the frame. I have grabbed the front bumper and rocked the truck side to side vigurously and nothing move, pops, or does anything out of the ordinary. Ive ran outta ideas
It still gets shaky at times. Ball joints, wheel bearing units arent even a year old. Track bar has same angle to tie rod as it had before and it didnt shake. literally one day i was driving and it got death wobble, but the track bar bracket came loose, so i retorqued bolts and aactually welded the bracket on the frame. I have grabbed the front bumper and rocked the truck side to side vigurously and nothing move, pops, or does anything out of the ordinary. Ive ran outta ideas
Senior Member
Joined: Apr 2014
Posts: 840
Likes: 0
From: las vegas, nv
Year: 1991
Model: Cherokee
Engine: I6 H.O, 99 manifold, APN header, neon injectors, cowl intake, screamin demon ignition system
Senior Member
Joined: Sep 2010
Posts: 617
Likes: 0
From: Las Vegas
Year: 1996
Model: Cherokee
Engine: 4.0
Senior Member
Joined: Sep 2010
Posts: 617
Likes: 0
From: Las Vegas
Year: 1996
Model: Cherokee
Engine: 4.0
No It still gets shaky at times. Ball joints, wheel bearing units arent even a year old. Track bar has same angle to tie rod as it had before and it didnt shake. literally one day i was driving and it got death wobble, but the track bar bracket came loose, so i retorqued bolts and aactually welded the bracket on the frame. I have grabbed the front bumper and rocked the truck side to side vigurously and nothing move, pops, or does anything out of the ordinary. Ive ran outta ideas
It still gets shaky at times. Ball joints, wheel bearing units arent even a year old. Track bar has same angle to tie rod as it had before and it didnt shake. literally one day i was driving and it got death wobble, but the track bar bracket came loose, so i retorqued bolts and aactually welded the bracket on the frame. I have grabbed the front bumper and rocked the truck side to side vigurously and nothing move, pops, or does anything out of the ordinary. Ive ran outta ideas
CF Veteran
Joined: Feb 2011
Posts: 1,944
Likes: 0
From: Henderson, NV
Year: 1999
Engine: 4.0L
