you may want to make a jig out of the good body before you go cut it out.. it will come in handy when it comes time to weld the piece into the new body.

 

Oh you're not gonna get off THAT easy.

This forum is full of PIC-******.

We REQUIRE pics of EVERYTHING.

Step by step.

We're nosy that way.

 

Hahaha ill pic ***** it up for you guys so you see whats going on. As of right now im delayed on the unibody But ill keep yeahs posted

 

Heres some pics of my jeep. Keep you guys entertained...

 

And thats my bike lol

 

To bad you don't own a sand blaster to clean up the whole area first. Then you could see exactly what you're working with.

 

My friend has a sand blaster. I have a benchtop one but its usless and want to sell it

 

Bike... FFUUUUNNNNNN!!!!!
but i still wouldyou with my Yam...

 

Ok so i started on my unibody project and i ran into a problem. I got the leaf pack bolt loose but it wont come out. Any ideas would be helpful thanks

dylan

 

anyone?
thanks

 

It's rusted into the steel bushing inside the rubber bushing. You will have to pound it out, and it's going to suck, trust me, I've done it!! Heat can help, but doesn't always work. You will want to replace the rubber and steel bushing, once you get them out. HTH!!

 

I got the steel bushing loose from inside. but it just wont come out.

 

3xs

 

Like I said, it SUCKS!! Hit it harder, burn it out, but it has to come out of there!! You can use a big drill bit, and drill some holes through the rubber bushing to help break it up. HTH!!

 

That's not that bad!

http://www.kastang.info/rustrepair.html