Parents decided to get me a new windshield for an xmas gift lol. Anyone know of any good bug/rock deflectors?

 

IMO yes

 

Hey dukie lookin at the difference between older prop valve and newer ones. Doesn't really appear to be a difference. Fab is same. Port sizing same. Not only for myself but for future ref for folks wanting to do the bendix 9 swap, what are the chances of nailing down a difference if there is one?

 

dunno i think the difference must be inside?

 

If i was a bettin man, my money would be they are the same thing.

 

Don't follow other motorist so close. Lol.

 

1. Engine rolls over but will not start.
2. No Spark.
3. Instrument Panel Not working.
4. Checked fuses - ok.
5. Swapped relays around - no change.
6. Tried to connect OBD II - unable to communicate.

Please advise - thank you.

 

Check your crank sensor disconnect it and hook a voltmeter up to the crank it should have a 5 volt reference. If it doesn't thats your problem. That's what it sounds like anyways like what you described.

 

Simple question: Looking at new wheels. I have a stock XJ. Sticking with 15". Stock tire size (225/75/15). What size backspacing would be good for stock specs? (I want my tires to stick out a little more but not to the point where my XJ isn't street legal). And can I fit 225/75 on a 15x8 wheel? If not, what would be recommended for the width?

Also, I live in PA. The law here states that the sidewall can stick out past the fender flares but the tread cannot...

Thanks for the help guys,
Griff

 

Id say a 235 would fit on a 15x8.
Stock backspacing is 5.25"

 

Thanks for the help, your comment in the other thread confused me lol! So a 235 would fit but do you know if 225 would fit? I just got 2 new tires (need two more now) so I need to keep that size for a while...if they wouldn't fit I guess I would have to go 15x7 right?

 

sorry, thought you wrote 235.
a 225 should be close to 9" wide.
Ive got to reading, and it looks like most would tell you to run 7" rims.

 

alright, that's fine....looks like when I get money for a lift I will need some new wheels too (I'm guessing you can't run a 11.5 on an 8" wheel)

 

Hi Folks - Newbe here ... I have a 1987 Jeep Cherokee project just started, and it has many odds and ends - unconnected. One mystery is a tube that I found hanging from near the tranny. Does anyone know where this plugs into? I'm attaching a picture ... hope it works...
[IMG]file:///C:/Users/Dennis/AppData/Local/Temp/moz-screenshot.png[/IMG]

 

I would have first thought the tranny breather hose but can't see the end too well so I might be wrong