Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
Seasoned Member
Joined: Mar 2011
Posts: 491
Likes: 0
From: Powhatan, VA
Year: 2000
Model: Cherokee
Engine: 4.0 I6
Originally Posted by 87laredoxj
Ok so I have some what upgraded coils on the front of my xj it has 2" over stock. I have spacers I want to put on do. I need to put on a track bar? if so what's the cheapest way to replace it only 16 so money is a little tight. Any help would be great
Junior Member
Joined: May 2011
Posts: 56
Likes: 0
From: Martins Ferry, Oh
Year: 1989
Model: Cherokee
Engine: L6, 4.0L (242 CID)
Hey, Can't for the life of me figure out how to get the wiper blades off of this 89 cherokee laredo... Napa part number 600182... any suggestions?
Seasoned Member
Joined: Mar 2011
Posts: 491
Likes: 0
From: Powhatan, VA
Year: 2000
Model: Cherokee
Engine: 4.0 I6
Originally Posted by 87laredoxj
They are 2" spacers
☠ CF Sheriff ☠

Joined: Nov 2009
Posts: 15,197
Likes: 18
From: Aberdeen, MD
Year: 1995
Model: Cherokee
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
If you want to remove it you'll probably have to get one custom made.
☠ CF Sheriff ☠

Joined: Nov 2009
Posts: 15,197
Likes: 18
From: Aberdeen, MD
Year: 1995
Model: Cherokee
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
k i have a few questions. 1st of all. i have a 94 xj and my reverse lights dont come on, but the bulbs are fine. where can i find the fuse? 2nd i have a fairly noticable amount of smoke out the tail pipe after a cold start. what could cause that? its white smoke so im thinking oil? 3rd i noticed i have a clutch and an electric fan.... why do i have 2 fans??? thats all i got at the moment any help would be greatly appreciated.
Relatively easy fix - just needs to be cleaned:
http://bc4x4.com/tech/2010/jeep-neut...ty-switch-nss/
Seasoned Member
Joined: Mar 2011
Posts: 491
Likes: 0
From: Powhatan, VA
Year: 2000
Model: Cherokee
Engine: 4.0 I6
Originally Posted by toogreat
k i have a few questions. 1st of all. i have a 94 xj and my reverse lights dont come on, but the bulbs are fine. where can i find the fuse? 2nd i have a fairly noticable amount of smoke out the tail pipe after a cold start. what could cause that? its white smoke so im thinking oil? 3rd i noticed i have a clutch and an electric fan.... why do i have 2 fans??? thats all i got at the moment any help would be greatly appreciated.
☠ CF Sheriff ☠

Joined: Nov 2009
Posts: 15,197
Likes: 18
From: Aberdeen, MD
Year: 1995
Model: Cherokee
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
This is the arm without the blade on it - should help you understand
Junior Member
Joined: May 2011
Posts: 56
Likes: 0
From: Martins Ferry, Oh
Year: 1989
Model: Cherokee
Engine: L6, 4.0L (242 CID)
The picture won't open that you sent.
Junior Member
Joined: May 2011
Posts: 56
Likes: 0
From: Martins Ferry, Oh
Year: 1989
Model: Cherokee
Engine: L6, 4.0L (242 CID)
Nevermind it sent, My wiperblades aren't like that. They have an arm, with a pin in the end that goes into a hole on the blades. Looks like a ratchet without the fitting on the end, just a pin. The blades are pivoted with a spring and they fold back, which i thought loosened the spring's tension on the pin, releasing it, but it doesn't, or at least its too tight. I lubed it up and still can't get it off.
☠ CF Sheriff ☠

Joined: Nov 2009
Posts: 15,197
Likes: 18
From: Aberdeen, MD
Year: 1995
Model: Cherokee
Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts
oh ok. In that case there is a latch on the bottom that you rotate off the shaft (the one that attaches to the arm). Unclip that from the shaft and it'll slide right off




