Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General Overview
- Jeep Grand Cherokee WJ 1999 to 2004 Crash Test and Safety Ratings
Important Information to help you understand your Jeep Grand Cherokee.
Browse all: General Overview
XJ Ask the Question Thread
This is my Jeep's temp. while driving, is it OK? I am thinking in attaching fans in front of th jeep to make it cooler! I found fans but I am hizitated bkoz they are made in China!! What do you recommand me to do?
Herp Derp Jerp

Joined: Nov 2011
Posts: 18,251
Likes: 17
From: Parham, ON
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
Middle of the gauge is where it's supposed to be. Your engine won't run any cooler than 195.
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
CF Veteran
Joined: Oct 2011
Posts: 1,812
Likes: 0
From: South Mills, NC
Year: 1998
Model: Cherokee
Engine: Rebuilt 4.0L I6
Well mine is overheating like crazy at 255° on the highway in 95° weather. I have no clue why. And it doesn't help that everyone is going slow.
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
CF Veteran
Joined: Apr 2011
Posts: 14,553
Likes: 1
From: Carrollton, GA
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
I'll ask here an not just the GA thread
My front right caliper is dragging again. I've replaced it once already, should I bleed the master cylinder this time and replace it? Doing new rotors too because I think it's warped- when I rotate the rotor it seems I catch and hang up an little bit more so I'm thinking that or the hub.
My front right caliper is dragging again. I've replaced it once already, should I bleed the master cylinder this time and replace it? Doing new rotors too because I think it's warped- when I rotate the rotor it seems I catch and hang up an little bit more so I'm thinking that or the hub.
CF Veteran
Joined: Oct 2011
Posts: 1,812
Likes: 0
From: South Mills, NC
Year: 1998
Model: Cherokee
Engine: Rebuilt 4.0L I6
Junior Member
Joined: Sep 2012
Posts: 82
Likes: 0
From: The 219
Year: 1998
Model: Cherokee
Engine: 4.0 I6
I'll ask here an not just the GA thread
My front right caliper is dragging again. I've replaced it once already, should I bleed the master cylinder this time and replace it? Doing new rotors too because I think it's warped- when I rotate the rotor it seems I catch and hang up an little bit more so I'm thinking that or the hub.
My front right caliper is dragging again. I've replaced it once already, should I bleed the master cylinder this time and replace it? Doing new rotors too because I think it's warped- when I rotate the rotor it seems I catch and hang up an little bit more so I'm thinking that or the hub.
Junior Member
Joined: Sep 2012
Posts: 82
Likes: 0
From: The 219
Year: 1998
Model: Cherokee
Engine: 4.0 I6
CF Veteran
Joined: Sep 2011
Posts: 10,447
Likes: 0
From: Frederick, MD
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by ccooper1234
Where can I get a Mopar thermostat? Where can I get a good fan clutch? Radiator?
CF Veteran
Joined: Oct 2011
Posts: 1,812
Likes: 0
From: South Mills, NC
Year: 1998
Model: Cherokee
Engine: Rebuilt 4.0L I6




