Tire shop. Same place you'll get the wheels put on at.

 

Can you turn the steering wheel with the vehicle on and the RPM's slightly increase? If they dont, you may have a bad sensor on the pump.. Not really something of a dire problem tho, mines never worked since the first day i owned it.

 

Well i plan to start powdercoating as a side source of money and i want to practice on my stuff before i do. Also powdercoating is cheap if you have the equipment. If you had the equipment you could paint some coils for about $2.50-4 in powder. Im currently getting all the necissary equipment together and will start in a couple weeks.

 

What gear oil should I use in my rear diff? Book says 75w-90 API-GL5. Should I go with that or something more heavy duty since I have 33s

 

If you mainy do offroad 75-140 is good if not, you will be fine with 75-90 or 80-90 gear oil.

 

What do you guys think about these tires?

http://www.onlinetires.com/products/...+rt03++bw.html

 

I read it on a powder coating companies website (they were here in Indiana) but they said the temps that stuff is powder coated at isn't enough to harm springs or change they spring rate.

 

Yea, mod coils come powder coated, so it can't hurt.

 

It is literally brand new, that's the third one they replaced

 

There must be something wrong somewhere else ****ing the pumps up if your on your third one.

 

How do you remove the overhead console in a 1990 Cherokee? I have one by want to recover it and put switches in

 

BFH

 

X2

 

Ok thanks guys. I figured i could do a unique coating compared to just a solid color.

 

Lime green