anyone with some input on this would be greatly appreciated. so i'm out wheeling last weekend and my brakes start to go to the floor every once in a while...i think no big deal becuase they always bounced back. well i get home and there is nothin. so i look at the brakes from under the jeep and there is fluid all over my passenger side wheel. so today i go and get a new caliper and hose for that side...change it out and bleed. should be fine right? NO! I bleed it down and the pedal feels firm when the engine isn't running. but as soon as i start the motor the pedal goes right to the floor. so i bleed it while its running and it just keeps doing the same thing. turn the motor off and its fine again. this sucks....anyone with some help..please!!

 

Did you bleed both sides?

 

yeah

 

As long as your pads are in place,and your calipers are all the way up against the pads,it has to be air,unless something has happened to your master cylinder.

 

thats what i'm fearing...not sure how much one of those costs though

 

Sometimes strange things just happen,a master cylinder can run anywhere from $50-$150,i would check with your local junkyard. But make sure you need it. Sometimes the caliper will stick and it takes a bit to get it against the pad.

 

i know i can get one from the junk yard. no problem. just wondering if you knew off hand how much they run. i doubt the pads are sticking cause i checked all that. thanks for your help man

 

I have no idea what one may cost where you live,I can get one here for about $20,new anywhere from $50-150,

 

$20 at the junk yard?

 

yes,at the one here,yours may be more or less. we actually have two in the area and they are very resonable.

 

well i'mma find out tomorrow or tuesday..hopefully its not that bad. i'm trying to do a run on the 21st for camp sunshine. its for the burn patients in the arkansas children's hospital