welding in jeep

Reply Subscribe

Thread Tools

Search this Thread

Jun 12, 2009 | 12:11 AM

#31

FlyingLow

Senior Member

Joined: May 2009

Posts: 747

Likes: 0

From: North Jersey

Year: 1996 XJ Sport 2007 KJ Rubicon

Engine: 242 4.0 Ho, 226 3.7 V6

Try this link. It's where I found mine.
http://www.chryslerpartsdirect.com/ If they have it, make sure to have their diagram handy cause they don't list part numbers when you call or go in to order them. Very reasonable price too!

Jun 12, 2009 | 12:16 AM

#32

4.3L XJ

CF Veteran

Joined: Aug 2008

Posts: 6,588

Likes: 495

From: Chico, CA

Year: 1986

Model: Cherokee

Engine: 4.3L with headers and full 3" exhaust system

Quote:

Originally Posted by BLKXJ 96

If you look at the second pic, you can almost count the "factory" spot welds on both frame rails. The floor pan is spot welded in and then the seam is sealed. When I was done It looked just like it comes from the factory, a spot weld about every 2.5 to 3 inches.

Spot welding is ok, but it is stronger than welding to an edge. If welding to an edge, it should be stitched

Jun 12, 2009 | 12:34 AM

#33

FlyingLow

Senior Member

Joined: May 2009

Posts: 747

Likes: 0

From: North Jersey

Year: 1996 XJ Sport 2007 KJ Rubicon

Engine: 242 4.0 Ho, 226 3.7 V6

Quote:

Originally Posted by BlueXJ

BLKXJ Do you know if they are also available for MJs? Can you list the part number so the local dealer can order it?

Is this what your looking for roughly?
.... Wait it wont allow me to direct link. Yes they have a floor kit for MJ's. You're just gonna have to go to the site and punch in your info. Once you do that got to the bottom of the list of the left side and search "floor". There should be one among the list saying something like "floor pan - pickup 1984-92". That should be it.