Vibrations

Reply Subscribe

Thread Tools

Search this Thread

Mar 25, 2015 | 10:38 PM

#16

ammonllewis1

Thread Starter

Junior Member

Joined: Mar 2014

Posts: 88

Likes: 0

From: Rexburg ID

Year: 1999

Model: Cherokee

Engine: I6

Gotcha, well that's definitely the case because the hook is no longer welded to the exhaust.

Mar 25, 2015 | 10:41 PM

#17

cruiser54

::CF Moderator::

Joined: Aug 2011

Posts: 43,971

Likes: 1,578

From: Prescott, Az

Year: 1990

Model: Cherokee (XJ)

Engine: 4.0

Quote:

Originally Posted by ammonllewis1

Gotcha, well that's definitely the case because the hook is no longer welded to the exhaust.

I was wondering about that.

Mar 25, 2015 | 11:06 PM

#18

JamDeeper

Senior Member

Joined: Jul 2011

Posts: 515

Likes: 1

From: ogden, utah

Year: 2000

Model: Cherokee

Engine: l6

All that wiggle room makes me thinks the flywheel could get goofy. No? I'm sure that would cause vibes if it were loose or even bent. Trans and motor probably took a good leap over a set of train tracks.

Mar 26, 2015 | 01:17 AM

#19

ammonllewis1

Thread Starter

Junior Member

Joined: Mar 2014

Posts: 88

Likes: 0

From: Rexburg ID

Year: 1999

Model: Cherokee

Engine: I6

So because it's not welded then that could cause the vibs?..Looking at the fly wheel I tightened all the bolts around it. So I don't know for sure if that"s the problem. But I can feel the transmission vibrate some. So I don't know what's going on.