Vac tubes for vacuum disco
#1
Junior Member
Thread Starter
Join Date: Oct 2009
Location: Tacoma
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Vac tubes for vacuum disco
Does anyone know where this blue tube goes? These photos are on the passenger side in the engine compartment by the firewall. These are the same colored tubes that connect to the vacuum disconnect and also on the transfer case. Thanx in advance.
Trending Topics
#9
Junior Member
Thread Starter
Join Date: Oct 2009
Location: Tacoma
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Dang. Ok. Thank you. Do you have any ideas then why my 4WD wont work? I have an NP231 transfer case. When I move the lever to go into 4 hi/lo I get nothing, nothing engaging, no front wheels grabbing. Any ideas?
#11
CF Veteran
I take it you have jacked up one front wheel and checked to make sure the light bulb isn't out. Generally, the culprit is the vacuum diaphragm on the axle disconnect. They are replaceable or you can opt for a more expensive cable operated disconnect. Another option is to take it apart and put some washers in so that it is connected all the time.
Thread
Thread Starter
Forum
Replies
Last Post
The Aristocrat
Wanted
2
02-25-2017 01:17 AM
csspencer
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-30-2015 08:32 AM
Endlessknight
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-26-2015 03:20 PM
Joshuapn
Other Vehicles. Other Jeep models & cars and trucks of other makes
1
09-25-2015 08:16 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)