i have a 2000 limited up country susp option and added2 lift. had to do a 1 inch tc drop is it going to affect motor mounts, or anything in a bad way?

 

no. but good luck with the bolts not shearing off or getting stripped. did mine today and was a pain in the you know what.. good luck man. pb blast it a few days ahead of time and heat it up good.

 

yea i did mine today heat and vise grips. jeep from fla no rusty bolts30 min job.

 

This site has helped me in HUGE WAYS,

thank you everyone

 

your one very lucky jeep owner. thats all i have to say haha

 

With your low pinion front dif, you want to watch for vibes in the front driveshaft. Tc drop does add some strain to the mounts, but very minor issue. Main concern for you is your front pinion,driveshaft angles.

 

would i have to be in 4wd to tell?

 

NO... If you have a 231 T-case you may not notice as much. With a 242 you will notice more when you use 4FT. Watch for excessive wear on the U-joints.