tansfer case question
12-07-2013, 08:44 PM
#1
Seasoned Member
Thread Starter
Join Date: Mar 2013
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
tansfer case question
Today I had my transfer case shift from 4 low to neutral twice when I was shifting my transmission. First I do have a sye and a auto transmission. Second I was not paying a lot of attention when shifting but I think it was when I was going from reverse back down to first. Any ideas on why this would happen? Thanks in advance!!!!
12-07-2013, 08:48 PM
#2
Today I had my transfer case shift from 4 low to neutral twice when I was shifting my transmission. First I do have a sye and a auto transmission. Second I was not paying a lot of attention when shifting but I think it was when I was going from reverse back down to first. Any ideas on why this would happen? Thanks in advance!!!!
transmission is cable operated, transfercase is linkage operated. I'd put my money on your transfer case linkage being out of adjustment.
12-08-2013, 07:04 AM
#4
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,876
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Transfer Case Linkage Adjustment
Straight from the FSM:
SHIFT LINKAGE ADJUSTMENT
(1) Shift transfer case into 4L position. (make sure your shifter is fully in the 4L position)
(2) Raise vehicle.
(3) Loosen lock bolt on adjusting trunnion (Fig.
87).
(4) Be sure linkage rod slides freely in trunnion.
Clean rod and apply spray lube if necessary.
(5) Verify that transfer case range lever is fully
engaged in 4L position. (you can do this under the vehicle at the transfer case)
(6) Tighten adjusting trunnion lock bolt.
(7) Lower vehicle
Straight from the FSM:
SHIFT LINKAGE ADJUSTMENT
(1) Shift transfer case into 4L position. (make sure your shifter is fully in the 4L position)
(2) Raise vehicle.
(3) Loosen lock bolt on adjusting trunnion (Fig.
87).
(4) Be sure linkage rod slides freely in trunnion.
Clean rod and apply spray lube if necessary.
(5) Verify that transfer case range lever is fully
engaged in 4L position. (you can do this under the vehicle at the transfer case)
(6) Tighten adjusting trunnion lock bolt.
(7) Lower vehicle
12-08-2013, 08:00 AM
#5
MJ>XJ
Join Date: Mar 2009
Location: Griffin, G.A.
Posts: 17,836
Likes: 0
Received 4 Likes
on
3 Posts
Year: 1990
Model: Comanche
Engine: 4.0 I6
This is OEM tech... not advanced... your not running a Atlas case right? Please read over the rules and post is the proper locations...
Thread
Thread Starter
Forum
Replies
Last Post
eepjeep
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
04-06-2020 03:19 PM
2heapjeeps
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
13
10-04-2015 10:52 PM
2heapjeeps
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-07-2015 11:30 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)