Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Stuck door

Thread Tools
 
Search this Thread
 
Old 12-16-2009, 12:11 PM
  #1  
Junior Member
Thread Starter
 
mexirican's Avatar
 
Join Date: Jun 2008
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0L
Default Stuck door

My passenger door is stuck closed. The outside button is broken (the plastic around the pin that opens the door broke and I cant reach the pin) and the inside handle is stuck in the open position but the door still wont open. Any ideas on how to open/fix my door?

Thanks
Old 12-16-2009, 12:35 PM
  #2  
CF Veteran
 
Abovetimberline's Avatar
 
Join Date: Jul 2009
Location: Chico,ca
Posts: 2,158
Likes: 0
Received 10 Likes on 9 Posts
Year: 89
Model: Cherokee
Engine: 4.0
Default

pull the panel off the door,it is held on by the door handle screws,and the door handle screws,the bottom is held on by plastic plugs,should be able to remove without any problem.
You can get to everything then.
Old 12-16-2009, 11:00 PM
  #3  
Junior Member
Thread Starter
 
mexirican's Avatar
 
Join Date: Jun 2008
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0L
Default

It's possible remove the dor panel without opening the door?
Old 12-16-2009, 11:06 PM
  #4  
CF Veteran
 
Abovetimberline's Avatar
 
Join Date: Jul 2009
Location: Chico,ca
Posts: 2,158
Likes: 0
Received 10 Likes on 9 Posts
Year: 89
Model: Cherokee
Engine: 4.0
Default

My jeep is not here at the moment,kids. But you may have to work at it but I am sure you can. For sure the top you can get off.
There is no alternative because you cannot even get the fender off to get to the door bolts unless you can open the door.
The other thing is those door panels are a dime a dozen at the jy,if you had to you could cut it off,sounds exstreme but you could replace it for less than $10.
Old 12-30-2009, 12:39 PM
  #5  
Newbie
 
kanman's Avatar
 
Join Date: Dec 2009
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Year: 1989
Model: Cherokee
Default

I kinda have the same problem. I got my panel off, but now i dont know how to get in there to open the door. I have an 89 cherokee 4-door. When I go to open the door there is little resistance. Its like the handles aren't catching.

Last edited by kanman; 12-30-2009 at 12:43 PM. Reason: worded the question wrong.
Old 12-30-2009, 12:48 PM
  #6  
CF Veteran
 
ckysodkorn_xj's Avatar
 
Join Date: Dec 2009
Location: Oxford NC
Posts: 1,882
Likes: 0
Received 0 Likes on 0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
Default

kick it open xD lol
Old 12-30-2009, 12:57 PM
  #7  
Newbie
 
kanman's Avatar
 
Join Date: Dec 2009
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Year: 1989
Model: Cherokee
Default

haha. Ya tried that. Short temper. Anyway, its stuck solid. I think it was frozen when I tried to open it and something just gave out.
Old 12-30-2009, 01:04 PM
  #8  
CF Veteran
 
ckysodkorn_xj's Avatar
 
Join Date: Dec 2009
Location: Oxford NC
Posts: 1,882
Likes: 0
Received 0 Likes on 0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
Default

have you guys ever taken your doors off? beacuse they may be misallienged. check the rod in the door and make sure that's still moveable.
Old 12-30-2009, 01:14 PM
  #9  
Newbie
 
kanman's Avatar
 
Join Date: Dec 2009
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Year: 1989
Model: Cherokee
Default

i haven't taken the door off, the kid before me could have, and yes the rod still moves. but its like its not catching to open the latch. and its stuck shut, making things so much better!
Old 12-30-2009, 02:59 PM
  #10  
CF Veteran
 
JerseyJeeper's Avatar
 
Join Date: Jul 2009
Location: New Jersey (Milltown, Lavallette, and Wayne)
Posts: 2,245
Likes: 0
Received 1 Like on 1 Post
Year: 1999
Model: Cherokee
Engine: 4.0L I6
Default

If you can get the whole panel off the door try to find the mechanism that holds the door to the clasp on the door jam. Use a flathead to try and disengage it from holding the door shut. You should be able to get the mechanism from inside the door. Good luck!
Old 12-30-2009, 03:30 PM
  #11  
CF Veteran
 
ckysodkorn_xj's Avatar
 
Join Date: Dec 2009
Location: Oxford NC
Posts: 1,882
Likes: 0
Received 0 Likes on 0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
Default

sounds like to me the kid before you took them off an thought he had them back on right and it finialy just shifted into the right place where it won't open. if it's a four door, you may want to concider taking the rear door off so you can get to the latch.
Old 12-31-2009, 09:28 AM
  #12  
Newbie
 
kanman's Avatar
 
Join Date: Dec 2009
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Year: 1989
Model: Cherokee
Default

I ended up getting it. I think there is something wrong with the locking mechinism, had to reach in there and turn pull the lever manually, and once i did that it opens and shuts fine. Its like the door will lock, but doesn't want to unlock. But I dont really want to screw with it today, newyears eve plans. thanks for the help. I got the door working, just not able to lock it.
Old 12-31-2009, 11:18 AM
  #13  
CF Veteran
 
JerseyJeeper's Avatar
 
Join Date: Jul 2009
Location: New Jersey (Milltown, Lavallette, and Wayne)
Posts: 2,245
Likes: 0
Received 1 Like on 1 Post
Year: 1999
Model: Cherokee
Engine: 4.0L I6
Default

Sounds like something a little WD-40 could fix lol
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
aglass0fmilk
Cherokee Chat
11
10-27-2020 08:05 AM
eagle11401
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
10-08-2015 04:36 PM
BluJay
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-23-2015 11:22 AM
xltom
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
09-19-2015 01:37 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Stuck door



All times are GMT -5. The time now is 01:17 AM.