Pre 97 gas tank skid
Thread Starter
Senior Member
Joined: Mar 2010
Posts: 789
Likes: 0
From: THE ALPS
Year: 1988
Engine: 4.0
I have a friend selling his 96 sport and it has the gas tank skid plate on it.im interested in buying it off of him. Will that skid fit 97+ with little or no modification? I have a factory hitch on my 99, would i have to remove it? Also how much should i offer him for it?
The skid will fit with a little mod. I'm in the middle of fitting one to my '97. The rear edge will need bending down, with the side welds cut. I'm also going to pack the fixing bolts 1/4" as the skid seems to pull up on my tank slightly.
As for the hitch, can't help you.
Rob
As for the hitch, can't help you.
Rob
CF Veteran
Joined: Sep 2008
Posts: 2,418
Likes: 0
From: HAMMOND IN
Year: 2000
Model: Cherokee
Engine: 4.0
if he is a friend he should let you take it, but other than that 5-10 bucks is more than enough
check my build thread in my sig one of the last couple pages shows the mods needed
check my build thread in my sig one of the last couple pages shows the mods needed
CF Veteran
Joined: Sep 2008
Posts: 2,418
Likes: 0
From: HAMMOND IN
Year: 2000
Model: Cherokee
Engine: 4.0
here it is, i forgot i did a crappy right up on it but check the link at the bottom
I had a buddy grab a gastank skid from the junk yard while he was there pre 97 though they charged him 5 bucks i gave him a 10 cause he brought it to me
gota modify it to work

in this pic you see were it bends up

you gota bend that almost straight
but first and a crappy pic you got to break this weld and bend thises little ears out straight

for another way to do this check this wright up
https://www.cherokeeforum.com/f2/pre...st-96-a-22399/
i have it on and done but no pics i will get some eventually
gota modify it to work

in this pic you see were it bends up

you gota bend that almost straight
but first and a crappy pic you got to break this weld and bend thises little ears out straight

for another way to do this check this wright up
https://www.cherokeeforum.com/f2/pre...st-96-a-22399/
i have it on and done but no pics i will get some eventually
Thread
Thread Starter
Forum
Replies
Last Post
NVRicochet3006
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
Sep 24, 2015 09:43 PM
jpmarine6786
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
Sep 10, 2015 07:46 PM
Chick-N-Picker
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Sep 6, 2015 03:34 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



