Part time and full time drive problems
#1
Newbie
Thread Starter
Join Date: Dec 2018
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee (XJ)
Part time and full time drive problems
1993 Jeep Cherokee Country
Last winter my jeeps part time and full time drive lever worked just fine. This winter I went to use it as normal and pulled it into part time which worked (and still works) fine. Then I tried to pull it into fulltime but it didn't want to go at all. When I managed to get it into full time felt like it was grinding at first and the light for it didn't even show up nor did it feel like full time. Any one have any ideas? I'm fairly new to jeeps (and working on cars in general). All help is much appreciated!
Last winter my jeeps part time and full time drive lever worked just fine. This winter I went to use it as normal and pulled it into part time which worked (and still works) fine. Then I tried to pull it into fulltime but it didn't want to go at all. When I managed to get it into full time felt like it was grinding at first and the light for it didn't even show up nor did it feel like full time. Any one have any ideas? I'm fairly new to jeeps (and working on cars in general). All help is much appreciated!
#2
CF Veteran
Join Date: Nov 2017
Location: Groton, MA
Posts: 3,695
Received 234 Likes
on
207 Posts
Year: 1995
Model: Cherokee(XJ)
Engine: I6 4.0L
It is probably that the linkage and selector on the transfer case is sticking. I would start by spraying some spray lubricant on the transfer case selector lever and the shift linkage. Get it really sprayed down and then try to work the lever while the Jeep is off and see if it starts "clicking" into place.
#3
CF Veteran
Join Date: Oct 2018
Location: Hunt County Texas
Posts: 1,096
Received 164 Likes
on
139 Posts
Year: 1995
Model: Cherokee (XJ)
Engine: 4.0L
^^If that doesn't work then it may just need to be adjusted.
Here is a video it's on a Grand Cherokee with 242 T-Case but process is the same as far as I know.
Here is a video it's on a Grand Cherokee with 242 T-Case but process is the same as far as I know.
#4
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,933
Received 1,534 Likes
on
1,244 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Are you shifting it the way it was designed to?
Here's how the factory suggests you shift the transfer case and I've been doing this since these things were new and I worked at the dealership. Quoted from the owner's manual. The suggestions in CAPS are mine.
"To engage, shift the transfer case lever from 2H to 4H while the vehicle is moving at any legal speed". I LET OFF THE GAS, THROW THE LEVER, TAP THE GAS AND LET OFF.
4L position: " To engage, slow the vehicle to 2-3 MPH , shift the transmission to Neutral, then shift the transfer lever to the right and pull firmly rearward to 4L".
TO SHIFT OUT OF 4L, SHIFT THE TRANSMISSION INTO NEUTRAL WITH THE VEHICLE STOPPED, SHIFT THE TRANSFER CASE LEVER TO 2H, THEN THE TRANS TO D IF YOU HAVE AN AUTOMATIC, OR INTO FIRST GEAR WITH A MANUAL, AND CONTINUE ON.
Revised 11/20/2014
Here's how the factory suggests you shift the transfer case and I've been doing this since these things were new and I worked at the dealership. Quoted from the owner's manual. The suggestions in CAPS are mine.
"To engage, shift the transfer case lever from 2H to 4H while the vehicle is moving at any legal speed". I LET OFF THE GAS, THROW THE LEVER, TAP THE GAS AND LET OFF.
4L position: " To engage, slow the vehicle to 2-3 MPH , shift the transmission to Neutral, then shift the transfer lever to the right and pull firmly rearward to 4L".
TO SHIFT OUT OF 4L, SHIFT THE TRANSMISSION INTO NEUTRAL WITH THE VEHICLE STOPPED, SHIFT THE TRANSFER CASE LEVER TO 2H, THEN THE TRANS TO D IF YOU HAVE AN AUTOMATIC, OR INTO FIRST GEAR WITH A MANUAL, AND CONTINUE ON.
Revised 11/20/2014
#5
CF Veteran
Join Date: Mar 2016
Posts: 3,240
Received 613 Likes
on
521 Posts
Year: 96
Model: Cherokee (XJ)
Engine: 4.0
1993 Jeep Cherokee Country
Last winter my jeeps part time and full time drive lever worked just fine. This winter I went to use it as normal and pulled it into part time which worked (and still works) fine. Then I tried to pull it into fulltime but it didn't want to go at all. When I managed to get it into full time felt like it was grinding at first and the light for it didn't even show up nor did it feel like full time. Any one have any ideas? I'm fairly new to jeeps (and working on cars in general). All help is much appreciated!
Last winter my jeeps part time and full time drive lever worked just fine. This winter I went to use it as normal and pulled it into part time which worked (and still works) fine. Then I tried to pull it into fulltime but it didn't want to go at all. When I managed to get it into full time felt like it was grinding at first and the light for it didn't even show up nor did it feel like full time. Any one have any ideas? I'm fairly new to jeeps (and working on cars in general). All help is much appreciated!
After changing it out, clean & lube mechanism, transfer was easy.
Inspect your LH engine mount, they get completely flogged out
Thread
Thread Starter
Forum
Replies
Last Post
MudMann94
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
50
03-04-2014 04:06 PM
DenaliRanger1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
24
05-27-2013 06:57 PM
Jumpalot
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
04-17-2013 11:58 PM
shooting sticks
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
01-02-2012 09:31 PM
MickDime
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
31
12-29-2010 04:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)