At idle my oil gauge reads just under 60 when I accel it reads all most 80 whats going on ?

 

Check your oil sending unit.

 

Is it a real need to fix prob?

 

That sounds like your problem. It could wait but, I would check/replace it. They are 30-40 bucks and are easy to change. Normally, your guage should read 30-40 at idle and 50-60 on accel.

 

check your oil level. for some reason mine was reading crazy high, and I checked my oil level and it was about 3qts low due to oil filter adapter housing o-ring was leaking.
topped oil off and went back down to normal pressure

your probably thinking, wouldnt the oil pressure drop if there was a leak? thats what I would think too, but those were my symptoms. check it out

 

How hard is that o ring to replace mine leaks I checked.the dip stick and its reading ok . Do you check the oil with the jeep running or off?

 

Check with Jeep off, and its not bad, its kinda a pain the way the bolt is. and all the room they give you to work with lol. but your best bet is to get the o-ring kit from chrysler. its like 5 bux (3 o-rings). I got my first kit from orielys, i had it back apart with in a week puttin the chrysler seals in due to leakage.

 

Thanks guys

 

Enough of the oil pressure questions already! Did everybody just now find out the have an oil pressure gauge?

 

Take it eazy man no need to get mad buddy I tryed the seach and I got nothing to answer my question. Not all of us are expert mechanic . I thought this site was to help others out and have fun doing it ?

 

X2. That's why I feel bad for my buddy who owns an exploder. The seriousexplorations people are **** about repeat questions. Its gonna happen. Don't get butt hurt. Its always gonna happen.