Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

New to me 89 and a tranny question.

Thread Tools
 
Search this Thread
 
Old 05-22-2014, 02:45 PM
  #1  
Junior Member
Thread Starter
 
texengland's Avatar
 
Join Date: Dec 2010
Location: San Angelo, TX
Posts: 67
Likes: 0
Received 0 Likes on 0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
Default New to me 89 and a tranny question.

I just picked up this 89 turd to polish and I have a couple questions. First is what is this switch? I didnt have this in my93. Next, the po said he was running autozone tranny fluid in it, could I just drain it and replace it with the proper dex? I don't want to fully flush if I dont have to.

New to me 89 and a tranny question.-forumrunner_20140522_144427.jpg
Old 05-22-2014, 04:07 PM
  #2  
::CF Moderator::
 
cruiser54's Avatar
 
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,864
Received 1,524 Likes on 1,236 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Default

Dex/Merc fluid is what you want. Autozone's version is fine and just do a drain and fill as your AW4 has a plug. It has no "filter" but a screen.

Adjust your tV cable as shown in the link.

https://www.cherokeeforum.com/f2/free-quick-fix-41821/


While you're familiarizing yourself with the earlier Renix Jeep, click on the link in my signature and do posts 1,3,4, and 5.

As for the switch on the dash, it switches programs in the Transmission Control Unit from Power to Comfort.

Your 93 had no switch and was defaulted to the Power mode.
Old 05-22-2014, 10:42 PM
  #3  
Junior Member
Thread Starter
 
texengland's Avatar
 
Join Date: Dec 2010
Location: San Angelo, TX
Posts: 67
Likes: 0
Received 0 Likes on 0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
Default

Thanks man
Old 05-22-2014, 10:57 PM
  #4  
Seasoned Member
 
krazynezz's Avatar
 
Join Date: Oct 2011
Location: spokane valley, wa
Posts: 433
Likes: 0
Received 2 Likes on 2 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
Default

As far as the power comfort switch. I believe that the power reportedly gives better fuel economy. Somebody will correct me if I'm wrong.
Old 05-22-2014, 11:13 PM
  #5  
::CF Moderator::
 
cruiser54's Avatar
 
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,864
Received 1,524 Likes on 1,236 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Default

Originally Posted by krazynezz
As far as the power comfort switch. I believe that the power reportedly gives better fuel economy. Somebody will correct me if I'm wrong.
Better drivability for sure and no decrease in fuel economy.
Old 05-23-2014, 12:01 AM
  #6  
Seasoned Member
 
letinsh's Avatar
 
Join Date: Jan 2011
Location: Austin
Posts: 302
Likes: 0
Received 4 Likes on 3 Posts
Year: 1987
Model: Wagoneer
Engine: 4.0
Default

Originally Posted by cruiser54

Better drivability for sure and no decrease in fuel economy.
+1
When I got my heep, I ran 7 tanks with the switch in each position. No fuel economy difference, and better drivability in Power position. Mixed city and Highway on my tests.
Old 05-23-2014, 12:03 AM
  #7  
CF Veteran
 
Radi's Avatar
 
Join Date: Apr 2012
Location: Wisconsin
Posts: 5,302
Likes: 0
Received 19 Likes on 16 Posts
Model: Cherokee
Default

If you leave it in "comfort", Cruiser comes to your house and fluffs your pillows.
Old 05-23-2014, 12:06 AM
  #8  
::CF Moderator::
 
cruiser54's Avatar
 
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,864
Received 1,524 Likes on 1,236 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Default

Now, if your switch does not light up in Power mode, you have to check the 7.5 amp "trans" fuse in the fuse box. If the fuse is blown, or the light doesn't illuminate in the Power position, the switch is probably shorted or open.
Easy fix.


Bypassing the Power/Comfort Switch on a Renix Jeep

Remove and unplug the switch. In the harness are 3 wires One has a stripe, one is tan, and the other black. Make a 4" jumper wire with a male spade at each end. Plug one end in the cavity for the tan wire and the other in the cavity for the striped wire and you'll be in permanent Power mode. Stuff the harness back in and reinstall the switch for looks.
Old 05-23-2014, 12:07 AM
  #9  
::CF Moderator::
 
cruiser54's Avatar
 
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,864
Received 1,524 Likes on 1,236 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Default

Originally Posted by Radi
If you leave it in "comfort", Cruiser comes to your house and fluffs your pillows.
More than likely I would leave something undesirable under your pillow.

Limburger cheese comes to mind.......
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tleed
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
10-04-2015 01:20 PM
sjm79902
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-30-2015 11:14 PM
DieselDaze
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
09-30-2015 06:42 PM
WoodysOffroad
Introductions
2
09-28-2015 03:37 PM
ToxicFox
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-27-2015 06:56 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: New to me 89 and a tranny question.



All times are GMT -5. The time now is 06:20 AM.