Fletch91

alright guys well I pulled the motor out of my 91 and I have it tore down to a bare block. well all the main and rod caps are nasty with old burnt oil and I don't know what to use to get the crap off I have checked everything and the cam and crank are in limits so no worries about that just need to see what help I can get to clean all the parts so there not nasty going back in I have already cleaned the block and got at lease 2 coffee cups worth of sludge build up out but it was with a presser washer and the rest of the parts are to small to power wash so im stuck at this point so any help would be nice thanks

jakbob

Kerosene.

cruiser54

Lets see some pix.

77olds

What's your budget? Taking it to a shop and having it all hot tanked would be ideal... but if you're looking for the cheap alternative, go buy a can of parts cleaner - it's basically large coffee-can type container full of solvents that you dip smaller parts into and let soak.

Bustedback

Good thing the OP is not in The People's Republic of California, you can't get the good stuff that works anymore in CA. Happy thoughts and good vibes don't work too well for cleaning grimey engine parts.

cruiser54

I thought having a group of 3 or more friends, holding hands and singing Koom-by-ah worked the best?

Bustedback

For the light stuff, but for the heavy muck you need a priest to perform an exorcism.

Fletch91

thanks guys i will have pics up of the whole build when im done