Does anyone have or know were i can find a good used 231 transfer case that will fit a 95 , 6 cyl , auto. Or maybe a rebuild kit?

 

I have been told that only 94 & 95 transfer cases are the some 231 J . True or False ?

 

a 231J is a 231J just need to check the input shaft spline count. I have one form a 92 but its going to cost you as much to ship as its worth.

 

As stated any 23 spline 231 will work.

 

So one out of a chevy or dodge would work as long as its a 231 , 23 spline ?

 

I'm in the market for one (maybe...depends on if it's an adjustment issue or a T Case issue)...and in my research here..

231 is the Transfer Case.

Has the # of splines based on the year (21 or 23)...

However, the J in the end is for Jeep...and as someone mentioned here, the 'same' transfer case in a Chevy would end in C or Dodge in D...and the bolt up to the trans will probably be different.

AFARR

 

Mounting holes are different

 

i would just source a junkyard or a guy off craigslist that is selling a cherokee for parts. you are sure to find one for a few hundred bucks, and while it is out might as well put a SYE kit on it.

 

I see , i think i`ll just keep lookin for the 231J than , thanks and good luck with yours . Let me know if you find a good sorce and i`ll doe the same.
Whats a SYE kit?

 

Good, by the way the Chevy is a passenger side drop so it will not work.

 

You could take the internals from a Dodge case and swap them into your existing Jeep case if it is not damaged. Not sure if the Chevy internals are the same or not though.

 

Thanks to everyone for all the great info. I did`nt think of swapin the gut i`ll have to keep that in mind.

I found a cool web site called thejeepthing.com its for people selling or buying used jeep parts might want to check it out.