is it a hydraulic jack or a scissor jack ( big nascar looking thing or a little triangly screw thing

 

a scissor jack might work, but they're not that side to side stable.

 

i dont think it will lift it high enough. u really need a floor jack to do this job. jmo

 

sorry about the picture that is probably just confusing you more...it was all I could find short notice

 

ok got it up and i think ive got it the tire is off and the clips are loose and the spring is off and the spacer is on top and now how do i put her back down that coil wont pop out now will it?

 

ive got one side lifted on cinder blocks and a jack and the other side is the same setup,

 

agreed, you need a floor jack.
i had two and it made the job waaaay easier. the I returned the crappy one that i had bought for like $20 later and said it had a defect!!! full refund!
that 3 ton of your dad's will help a lot

 

that was freaking fast.
if you put the bumpstop back on and did everything right, the coil should not " pop out"
jesus that would be scary

 

just put the coil back in if you havent, nothing too complicated

 

ok i got it and its jacked up now i can work on it thanks guys
and i wont have to get longer shocks will it

 

for the blocks how long are they like side to side and wat width is good im going to make my own steel blocks

 

reading this makes me want to grab my own 2" budget lift haha.

 

yea im gonna make some blocks and put some shackles on the back on another day

 

cool, yah your shocks will work fine
Good luck!

 

Thank you guys very much you guys have been extremely helpfull... im glad ive joined this forum.... and my dad is thinking about joining...