Jeeps is spending the night in a mud bog
Thread Starter
Newbie
Joined: May 2010
Posts: 9
Likes: 0
From: New Brunswick
Year: 1995
Model: Cherokee
Engine: 4,0l
My jeep is sitting in a mud bog.. right now for the night LOL! any suggestions on how to get it out. i dont have any tow point ?!
Junior Member
Joined: Jan 2010
Posts: 33
Likes: 0
From: San Jose
Year: 2000
Model: Cherokee
Engine: 4.0
i recommend digging, trailer hitch, or if you can find a place on the unibody rails.
Trending Topics
Senior Member
Joined: Aug 2009
Posts: 958
Likes: 0
From: Effingham, N.H.
Year: 1989
Model: Cherokee
Engine: 4.0 I6
I love that video!!! The person isn't the brightest bulb on the tree. You can use the axle to pull from, just don't pull it at an angle like the guy in the vid.
CF Veteran
Joined: Nov 2008
Posts: 7,874
Likes: 100
From: Northern Ontario, Canada
Year: 1990, 1999, 2000
Model: Cherokee
Engine: 4.0
find a tow truck guy and see if he will lend you his t-hook/cluster.
then in the frame rail, there is a slanted slot for the hook to fit into.
use a shackle to hook it up to a STRAP and pull it out.
just be sure to bring a shovel cause now that the jeep has been sitting, the mud will have settled around everything, making it that much harder to move.
use the hitch first, if you have one.
at this point, DON'T pull from the axle, unless you want to upgrade.
good luck
then in the frame rail, there is a slanted slot for the hook to fit into.
use a shackle to hook it up to a STRAP and pull it out.
just be sure to bring a shovel cause now that the jeep has been sitting, the mud will have settled around everything, making it that much harder to move.
use the hitch first, if you have one.
at this point, DON'T pull from the axle, unless you want to upgrade.
good luck
There are definitely good spots on the uni-body. Back in the day I had to use some when I didn't have good pull points up front. The holes may stretch but they held up. After that I bought a front receiver.
Don't do the axle for sure. Shovel and some boards couldn't hurt either.
Been there before, Good luck!
Don't do the axle for sure. Shovel and some boards couldn't hurt either.
Been there before, Good luck!
CF Veteran
Joined: Mar 2009
Posts: 1,988
Likes: 3
From: USA
Year: 1999
Engine: l6 4.0, K&N FIPK & 62mm bored TB
CF Veteran
Joined: Aug 2010
Posts: 2,112
Likes: 4
From: Wantage, NJ
Year: 1995
Model: Cherokee
Engine: 4.0 I6


