Niac

Will someone identify a part for me please. It's not mounted anymore but is plugged into the wiring harness. I could probably figure it out but this is the easy way,

90xj,99xj,92mj

is that a nss?

alsxj

Looks like it too me, its suppose to be mounted on the side of your transmission. Is that where you found it, up in the engine bay?

xjmarc

That's def a neutral safety switch and a broken one by the look of it.

90xj,99xj,92mj

ha is that jb weld? and do your reverse lights work?

ProudXjOwner

Wow I would like to know who and why somebody would put a NSS there?

Niac

Thanks guys. It was an automatic the was converted to standard before I bought it.
I suppose it should be mounted on the transmission somewhere.
At the risk of sounding stupid.
Where?

90xj,99xj,92mj

i believe its different from auto to stick, probably the same plug different sensor

Niac

Maybe it was left connected so the computer wouldn't through codes?
And nope no backup lights.

USMCJeeper

I would like to say wow to the OP. The PO definitely left you with a fun bag of presents, almost like santa except not cool like. I would say look at a haynes or chiltons manual about the nss for manuals. I don't have a stick but I know it throws codes like crazy if it gets muddy as I cleaned mine off about 6 months ago. Start by checking the manual, then hopefully someone with a stick will chime in.

Good luck, Im following this one.

89Laredo

Thats a Nss for the auto transmission.
They left it hooked up so you dont get codes and the jeep will start.

Niac

I may just tuck in out of the way and hope it don't come back to bite me.

89Laredo

I wouldnt worry about it, Its one of the things that happens when you change a vehicle to something it was never supposed to be...