That is the end of my exhaust system... It is hanging on by that wire around that hook.... It can fall off at any time while driving... How can i make a quick fix... Dont have the money to take it to a shop....

 

I would go to the local jy and cut that piece off and get a coupling that will fit over both ends,and clamp it in place,you will need a couple of hangers,the other way is to try and put together some pipe from the local autoparts.

 

just go to a hardware store, get some metal strapping. Drill a couple holes in that old hanger, run the strapping through it, and around the exhaust pipe, and call it good.

 

ok and i was thinking of putting a hole where it is hung at on the hook and run it in threw there so i knew for sure it wouldnt fall off...

 

jy is ur best bet cause i tried piecing an exhaust togethor from the parts stor i think its impossible lol

 

ok and like when driving it vibrates really loud what could i put in between there to stop it

 

the OEM rubber spacer....

You could try to find something at the auto store...

 

the tail pipe section is 20$ from autozone.

 

i scored a Borla catback for 13$$ at my local JY. look around....

 

I would get the proper tailpipe. Judging by all the soot on the rear diff your blowing the hot exhaust right onto it. I wonder how that gear oil is holding up under all that heat.

 

just buy a new tailpipe and rubber mounting