help im realy confused
#1
Newbie
Thread Starter
Join Date: Feb 2012
Location: west virginia
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L H.O. i6
help im realy confused
can someone simplify something for me. I have a 96 xj 4.0 what fuel injectors can I get for an upgrade that are plug and play I have read many post but so confusint to me any1 know a simple buy thes type and install then plug and play sorry for being so dumb about it. I want to do this upgrade but I cant figure out what injectors to get.
#3
Senior Member
Join Date: Mar 2012
Location: FL.
Posts: 615
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Trending Topics
#8
CF Veteran
Join Date: Oct 2011
Location: Bakersfield CA
Posts: 1,268
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
You could not have been more off on this one.
OP
703 injectors are what you are wanting to put in yours.
Full part number is
0280155703
Attachment 228385
OP
703 injectors are what you are wanting to put in yours.
Full part number is
0280155703
Attachment 228385
my bad 03s' is what I meant, h%$# I just gave away a set I had lyin around.
#9
Newbie
Thread Starter
Join Date: Feb 2012
Location: west virginia
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L H.O. i6
what I understand from the site prcherokee posted I have the jetronic/minitimer/EV1 conector type now to figure out what injector to get with this connection I sure didn't understand nothing else on that site told you all im dumb lol
#11
CF Veteran
Join Date: Aug 2011
Location: Nor-Cal Coast
Posts: 10,489
Likes: 0
Received 17 Likes
on
17 Posts
Year: 90,84
Model: Cherokee
Engine: 4.0,2.5
The 703's will do you fine, I found none in Neon's. Seabreese and Labaron is where I found them.
There are plenty others, maybe even 6 hole now. 21 lbs/hr is what you want I think. Injectors have different resistance, not sure how much that matters...I think lower resistance might result in more current flow through the pcm, but they don't differ allot. Programbo here on our forum has a bunch to offer. Here's some info, Best of luck!
http://www.polog40.co.uk/article_injector_table.php
There are plenty others, maybe even 6 hole now. 21 lbs/hr is what you want I think. Injectors have different resistance, not sure how much that matters...I think lower resistance might result in more current flow through the pcm, but they don't differ allot. Programbo here on our forum has a bunch to offer. Here's some info, Best of luck!
http://www.polog40.co.uk/article_injector_table.php
Last edited by DFlintstone; 01-23-2014 at 02:59 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Harney315
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-23-2015 09:41 PM
MoToad
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-20-2015 11:50 PM
Programbo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
09-20-2015 07:12 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)