djgrayxj

Note from DJ

Here is some information that I finely just finished collection last night it contains the NAPA Auto Parts part numbers for the two different sensors that fit in the back of the head.
The first information is what I think is correct for the full Gage system sensor; the second information is what I think is correct sensor for the warning light Gage system.

What you will need to do is call your local NAPA and give them the parts number and ask them to check stock availability on the two numbers. I’m hopefully they will have at least one of the two in question. If they do take a VOM Meter with you and ask then to open the box; what you need to do is take your VOM and set it to ohms then place on lead on the body threaded part and the other lean on the top part of the sensor. What you are looking for is resistance reading; if you see resist value then you have the correct sensor. If no resistance that is the sensor for the warning light system which is no good for you, this is what you already have.

Please post which part number is correct for the full Gage system? This question is asked every so often.

XJ Temperature Sensor – Gauge at NAPA?
https://www.napaonline.com/en/p/ECHTS6685
Part #: ECH TS6685 Product Line: Echlin Ignition
Temperature Switch Thread Size 1/8 x 27 in.
C At 100 Deg. F. 1320 With 2% Tol, O At 220 Deg. F. 1250 With 2% Tol
For Jeep Cherokee 1992 – 1996

XJ Temperature Sensor at NAPA
Part #: MPE TS6685SB Product Line: Mileage Plus Electrical
https://www.napaonline.com/en/p/MPETS6685SB
For Jeep Cherokee 1992 – 1996