zeep99xj

This is my first attempt at a TC drop so im a huge newb at it. I got the bolts off but two of the bolts are attached to the unibody. How do i get them out to put the longer ones in? Is this the stud everyone says to use the double nut trick or whatever on?

Heres a pic of the attached bolt

troy fritz

PB Blaster,MAP gas and a pipe wrench worked great for me.

zeep99xj

But how does it come out? There is no acces hole or anything to grab the bolt. Does it not have a head on it? Im thuroughly confused

zeep99xj

I tried the double nut trick and all it does is loosen both nuts until the bottom one falls off

troy fritz

I didn't use 2 nuts.Just put the pipe wrench on the stud and remove.It's a stud in there with a weld nut inside the frame rail.

rich

Sears makes a studremover might make life easier.

zeep99xj

Pipe wrench worked like a charm! Thank you soo much!

troy fritz

Thats what we're here for.Glad you got it out.

zeep99xj

Now ive got a whole new problem
https://www.cherokeeforum.com/f2/tc-...ignment-51739/