Dumb TC drop question
This is my first attempt at a TC drop so im a huge newb at it. I got the bolts off but two of the bolts are attached to the unibody. How do i get them out to put the longer ones in? Is this the stud everyone says to use the double nut trick or whatever on?
:help: Heres a pic of the attached bolt http://i947.photobucket.com/albums/a...j/DSCN0101.jpg |
PB Blaster,MAP gas and a pipe wrench worked great for me.
|
But how does it come out? There is no acces hole or anything to grab the bolt. Does it not have a head on it? Im thuroughly confused :icon_confused:
|
I tried the double nut trick and all it does is loosen both nuts until the bottom one falls off
|
I didn't use 2 nuts.Just put the pipe wrench on the stud and remove.It's a stud in there with a weld nut inside the frame rail.
|
Sears makes a studremover might make life easier.
|
Pipe wrench worked like a charm! Thank you soo much! :notworthy:
|
Originally Posted by zeep99xj
(Post 587901)
Pipe wrench worked like a charm! Thank you soo much! :notworthy:
|
Now ive got a whole new problem :brickwall:
https://www.cherokeeforum.com/f2/tc-...ignment-51739/ |
All times are GMT -5. The time now is 07:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands