Clunking in front diff
Thread Starter
Member
Joined: Feb 2011
Posts: 116
Likes: 0
From: NJ
Year: 2000
Model: Cherokee
Engine: 4.0 I6
Hey guys I'm getting a nasty clunking in my front end when I'm accelerating and hitting a bump in the road or when turning right. There is also a small leak in the rear where the driveshaft goes into the housing. It has to be drivetrain related since it is only happening when I'm accelerating.
Any ideas on what the problem is?
Thanks
Any ideas on what the problem is?
Thanks
Senior Member
Joined: Jan 2012
Posts: 720
Likes: 1
From: vanburen
Year: 1995 &2000
Model: Cherokee
Engine: 4.0
Clunking could be trackbar,lca,t oí e rods,just have someone move sterring wheel back and forth while you look at the front end parts and feel for the popping
Thread Starter
Member
Joined: Feb 2011
Posts: 116
Likes: 0
From: NJ
Year: 2000
Model: Cherokee
Engine: 4.0 I6
Originally Posted by nickxj94
Clunking could be trackbar,lca,t oí e rods,just have someone move sterring wheel back and forth while you look at the front end parts and feel for the popping
Seasoned Member
Joined: Dec 2011
Posts: 319
Likes: 0
From: High Desert, CA
Year: 1987
Model: Cherokee
Engine: I6
My buddies made a clunk as well. LCA bushing was gone. Might as well rule out the things people are suggesting rather than brushing them off. Only takes a minute.
Might want to check the backlash. Does it make the same noise when suddenly decelerating?
Might want to check the backlash. Does it make the same noise when suddenly decelerating?
Trending Topics
Thread Starter
Member
Joined: Feb 2011
Posts: 116
Likes: 0
From: NJ
Year: 2000
Model: Cherokee
Engine: 4.0 I6
Originally Posted by JeepDeep
My buddies made a clunk as well. LCA bushing was gone. Might as well rule out the things people are suggesting rather than brushing them off. Only takes a minute.
Might want to check the backlash. Does it make the same noise when suddenly decelerating?
Might want to check the backlash. Does it make the same noise when suddenly decelerating?
Senior Member
Joined: Jan 2012
Posts: 720
Likes: 1
From: vanburen
Year: 1995 &2000
Model: Cherokee
Engine: 4.0
Well I reread it LOL, grab your driveshaft on the front and see if it has any play up and down or side to side could be a pining bearing failure, if not check the upper and lower control arms,my lowers have a bad bushing and it clunks when acceleration braking turning and backing up
CF Veteran
Joined: Dec 2011
Posts: 4,006
Likes: 1
From: Pasadena, MD
Year: 1987
Model: Wagoneer
Engine: Renix 4.0
Well I reread it LOL, grab your driveshaft on the front and see if it has any play up and down or side to side could be a pining bearing failure, if not check the upper and lower control arms,my lowers have a bad bushing and it clunks when acceleration braking turning and backing up
Senior Member
Joined: Aug 2010
Posts: 692
Likes: 1
From: Tempe, AZ
Year: 1990
Model: Cherokee
Engine: l6 242
Thread
Thread Starter
Forum
Replies
Last Post
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
Feb 28, 2016 02:05 AM
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
39
Nov 7, 2015 01:22 AM
studmuffin
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Sep 3, 2015 06:59 PM
Buzball
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
Sep 2, 2015 05:28 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



