Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Clunking in front diff

Thread Tools
 
Search this Thread
 
Old 03-05-2012, 02:01 PM
  #1  
Member
Thread Starter
 
matt720's Avatar
 
Join Date: Feb 2011
Location: NJ
Posts: 116
Likes: 0
Received 0 Likes on 0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 I6
Default Clunking in front diff

Hey guys I'm getting a nasty clunking in my front end when I'm accelerating and hitting a bump in the road or when turning right. There is also a small leak in the rear where the driveshaft goes into the housing. It has to be drivetrain related since it is only happening when I'm accelerating.

Any ideas on what the problem is?

Thanks
Old 03-05-2012, 02:04 PM
  #2  
CF Veteran
 
Gee oh Dee's Avatar
 
Join Date: Sep 2010
Location: Milwaukee, WI
Posts: 21,168
Likes: 0
Received 5 Likes on 5 Posts
Year: 1987
Engine: Check
Default

The clunk in the front probably has nothing to do with the leak in the rear.

The leak sounds to be your pinion seal.
Old 03-05-2012, 02:09 PM
  #3  
Senior Member
 
nickxj94's Avatar
 
Join Date: Jan 2012
Location: vanburen
Posts: 720
Likes: 0
Received 1 Like on 1 Post
Year: 1995 &2000
Model: Cherokee
Engine: 4.0
Default

Clunking could be trackbar,lca,t oí e rods,just have someone move sterring wheel back and forth while you look at the front end parts and feel for the popping
Old 03-05-2012, 03:22 PM
  #4  
Member
Thread Starter
 
matt720's Avatar
 
Join Date: Feb 2011
Location: NJ
Posts: 116
Likes: 0
Received 0 Likes on 0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 I6
Default

Originally Posted by nickxj94
Clunking could be trackbar,lca,t oí e rods,just have someone move sterring wheel back and forth while you look at the front end parts and feel for the popping
I know it's not that because it's only happening when I am accelarating
Old 03-05-2012, 03:23 PM
  #5  
Member
Thread Starter
 
matt720's Avatar
 
Join Date: Feb 2011
Location: NJ
Posts: 116
Likes: 0
Received 0 Likes on 0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 I6
Default

Posted twice

Last edited by matt720; 03-05-2012 at 03:32 PM.
Old 03-05-2012, 03:31 PM
  #6  
Member
Thread Starter
 
matt720's Avatar
 
Join Date: Feb 2011
Location: NJ
Posts: 116
Likes: 0
Received 0 Likes on 0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 I6
Default

Three times
Old 03-05-2012, 03:35 PM
  #7  
Seasoned Member
 
JeepDeep's Avatar
 
Join Date: Dec 2011
Location: High Desert, CA
Posts: 319
Likes: 0
Received 0 Likes on 0 Posts
Year: 1987
Model: Cherokee
Engine: I6
Default

My buddies made a clunk as well. LCA bushing was gone. Might as well rule out the things people are suggesting rather than brushing them off. Only takes a minute.

Might want to check the backlash. Does it make the same noise when suddenly decelerating?
Old 03-06-2012, 02:51 PM
  #8  
Member
Thread Starter
 
matt720's Avatar
 
Join Date: Feb 2011
Location: NJ
Posts: 116
Likes: 0
Received 0 Likes on 0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 I6
Default

Originally Posted by JeepDeep
My buddies made a clunk as well. LCA bushing was gone. Might as well rule out the things people are suggesting rather than brushing them off. Only takes a minute.

Might want to check the backlash. Does it make the same noise when suddenly decelerating?
I checked those first and narrowed the noise to the front differential
Old 03-07-2012, 07:08 PM
  #9  
Senior Member
 
nickxj94's Avatar
 
Join Date: Jan 2012
Location: vanburen
Posts: 720
Likes: 0
Received 1 Like on 1 Post
Year: 1995 &2000
Model: Cherokee
Engine: 4.0
Default

Well I reread it LOL, grab your driveshaft on the front and see if it has any play up and down or side to side could be a pining bearing failure, if not check the upper and lower control arms,my lowers have a bad bushing and it clunks when acceleration braking turning and backing up
Old 03-07-2012, 08:21 PM
  #10  
CF Veteran
 
jakbob's Avatar
 
Join Date: Dec 2011
Location: Pasadena, MD
Posts: 4,006
Likes: 0
Received 1 Like on 1 Post
Year: 1987
Model: Wagoneer
Engine: Renix 4.0
Default

Originally Posted by nickxj94
Well I reread it LOL, grab your driveshaft on the front and see if it has any play up and down or side to side could be a pining bearing failure, if not check the upper and lower control arms,my lowers have a bad bushing and it clunks when acceleration braking turning and backing up
Dont forget the u joints.
Old 03-07-2012, 08:24 PM
  #11  
Senior Member
 
LeRoy90laredo's Avatar
 
Join Date: Aug 2010
Location: Tempe, AZ
Posts: 692
Likes: 0
Received 1 Like on 1 Post
Year: 1990
Model: Cherokee
Engine: l6 242
Default

Originally Posted by jakbob
Dont forget the u joints.
and also check the tracbar bolts on the axle side. they are usually a culprit for the clunking when turning.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
denverXJ
Cherokee Chat
8
10-23-2018 04:36 PM
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
02-28-2016 02:05 AM
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
39
11-07-2015 01:22 AM
studmuffin
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-03-2015 06:59 PM
Buzball
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
09-02-2015 05:28 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Clunking in front diff



All times are GMT -5. The time now is 09:50 PM.