kool

 

I got the D-ring from here http://www.quadratec.com/products/92145_501.htm and here are the pic's...Tj

 

you posted this the other day it goes up and hook on the uniframe lip right i puul with a 6 inch clevis the proper name around my spring shackle

 

It looks like your running without a sway bar ,yes? If so do you think they will work with one .

 

I know its a "Drawtight" hitch but am not sure what class it is. It mounts like a class 3 with 6 bolts...Tj

 

I have the sway bar connected on mine...Tj

 

dont thik it gonna with the sway bar there

 

updates will be posted

 

hooks still holding up great never even fab a plate to replace the washers yet been pulled out 10 or 12 times so far .

 

Could you use this with the sway bar? I have easy access to these hooks for $5 and would like to do it. It looks like one said yes and OP said no.

 

my friends chevy hook broke the other day as well... i would becareful it went through my friends rear window.... the hook itself broke not the frame.... just figured iI would give you a heads up... maybe they wear out or something...

 

if you mount it under the swaybar with a plate and longer bolts i think you could

 

personally, i don't see this going very well.
but that's just my opinion, and it ain't worth anything.

some things just shouldn't be jerry-rigged.

 

still holding strong dont get much use outta them since bumper install with winch

 

Thanks for posting about the tow hooks from a chevy truck. I also noticed the same hooks on the rounded body style chevy S10 Blazers and they came with a 1/2 inch spacer specifically designed to raise the hook. You may want to swap those in place of your washers.

Thanks for the tip,

Mike