i would love to do that, but i cant even move it currently

 

sounds like CSP to me. when mine went it would just die and id have to pull over and wait about 30 minutes for it to reset.. so definitely check that out

 

CSP? im not familiar with that? what is that?

 

Think he ment CPS, crank position sensor.

 

ooo okay. well im not positive, but i dont think my jeep would even crank if that was bad, right?

 

was ur jeep doing ok before u changed the alternator?
If yes...check the harness from the alternator to the pcm....coil and grounding...
Mine the socket to the coil pack did not sit in tightly...it will turn over but no start...deprived of spark....
I wiggled the 2 wies to the coil pack and it started...
Cleaned the connectors with contact cleaner and used a small screwdriver to cramp the brass connectors inside the socket and it does well....at the same time I cleaned all the connections to the alternator with wire brush.
Hope this help...good luck.

 

If the crank sensor is bad your jeep will still crank over but will not start.

 

HAHA yeah CPS not CSP put the s for shaft and confused myself.
but yeah if nots cranking at all you have other problems . check your ignition switch?

 

Try replacing the battery first, easy job.

 

Question....after the jeep died, did you try to jump it at all? If you did, what happened? If you haven't maybe you should try that first. If it starts take it from there.......

 

it turned out to be my coil pack. thanks for the help!