Bendix 9 abs conversion
#1
Newbie
Thread Starter
Join Date: Feb 2015
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 HO
Bendix 9 abs conversion
I finished this swap several days ago but no pressure is building in the brakes. There's no leaks and I've bled the brakes several times and put in new master cylinder and booster but still nothing and there's no clogs because I'm getting fluid from from all four lines. Have any of you guys that have done this swap had this problem? Any ideas will help because I'm stumped.
#2
Seasoned Member
Join Date: Oct 2013
Location: Idaho
Posts: 376
Likes: 0
Received 4 Likes
on
3 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 Liter
I had that that problem. First my master cylinder was bad. I put my new master cylinder in and still had the problem. I had to re bench bleed the master cylinder. Then I had to bleed all my lines several times. Checked the fittings for leaks?
#3
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,875
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Exactly how did you convert it?
#4
Newbie
Thread Starter
Join Date: Feb 2015
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 HO
I got a master cylinder and booster from a 1990 cherokee and then took out the old accumulator and then everything else pretty much bolts up. The hard part is running the lines. I just used some of the old lines and made new ones from the porportioning to the left front and from the master cylinder to the porportioning valve.
Thread
Thread Starter
Forum
Replies
Last Post
FS[GreatLakes]: Aw4 Transmission 67xxx miles
JeepStephie99
Engines/Tranny/T-Case
14
11-19-2015 11:49 AM
64dodge
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
09-30-2015 05:50 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)