axles?????
#1
Senior Member
Thread Starter
Join Date: May 2009
Location: gig harbor, washington
Posts: 728
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0 L
axles?????
so a guy on craigslist is selling a dana 30 and a dana 35 from a yj with 4.11's 300 for the set! are the yj axles shorter then the xj axles or would they be too short and not have enough tire clearance?
i was looking at 1800 to regear but if i can do it this way it would be alot cheaper and more fun
thanks cole
i was looking at 1800 to regear but if i can do it this way it would be alot cheaper and more fun
thanks cole
#2
CF Veteran
If you're going to swap axles you might as well get a rear axle that's stronger than a D35. Most people here will tell you that. They will also tell you not to regear the 35 as it's wasted money; D35 is a weak axle and prone to breakage. The deal looks tempting & waiting is tough, but be patient. The right deal will come along and waiting might save you from having to do it all again.
#3
Seasoned Member
Join Date: Dec 2008
Location: Chattanooga, TN
Posts: 443
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
If you're going to swap axles you might as well get a rear axle that's stronger than a D35. Most people here will tell you that. They will also tell you not to regear the 35 as it's wasted money; D35 is a weak axle and prone to breakage. The deal looks tempting & waiting is tough, but be patient. The right deal will come along and waiting might save you from having to do it all again.
Edit: 1800 to regear is outrageous. Going rate around here is 300 an axle which is still a bit steep imo. I did mine myself
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)